问题原文
原帖链接 · mushr00mer1990 · CC BY-SA 3.0
Is it possible to configure the radvd config so that the router advertisement
packets got a VLAN- tag? Theres a switch between my Router (software router, Ubuntu OS) and I
only want some VLANs to recieve router advertisements. My switch isn't that powerful to
filter icmpv6 type 134 packets.
已采纳解答
原帖链接 · Sander Steffann · CC BY-SA 4.0
First you have to configure the VLANs on the Ubuntu box. This is documented in the VLAN page of the Ubuntu Wiki. First you have to make sure that the VLAN module is loaded into the kernel:
echo "8021q" | sudo tee -a /etc/modules
And then you create interfaces for the VLANs. In this example an interface is created for VLAN 10z on eth1and it gets IPv6 address2001:db8:ab:cd::1/64`:
auto eth1.10
iface eth1.10 inet6 static
address 2001:db8:ab:cd::1
netmask 64
vlan-raw-device eth1
After you create this interface you can configure radvd as usual. Here is an example based on the IPv6 page of the Ubuntu Wiki:
interface eth1.10
{
AdvSendAdvert on;
prefix 2001:db8:ab:cd::/64
{
AdvOnLink on;
AdvAutonomous on;
};
};
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
