大网数据广告活动
服务器运维问答

HP Proliant RAID setup; does the order matter?

· 52CE 我爱测

This should be a simple answer but I need to know before proceeding with my configuration. I have an HP Proliant DL380 G6 6-port server. I need to create a Raid array using 4 drives but port 1 and 3 are in use so can I create a R…

问题原文

原帖链接 · texpert · CC BY-SA 3.0

This should be a simple answer but I need to know before proceeding with my configuration. I have an HP Proliant DL380 G6 6-port server. I need to create a Raid array using 4 drives but port 1 and 3 are in use so can I create a Raid10 array using ports 2-4-5-6 ? Or should they be consecutive? Does it even matter?

已采纳解答

原帖链接 · ewwhite · CC BY-SA 3.0

You could also just move the drives into the ports you prefer...

In one action, you could move the disk in port 3 to port 2.

In a separate action (following a reboot and the controller drive recognition), you could populate the remaining drive slots.

But if not, no, it doesn't matter. You The array controller doesn't require the drives to be in any specific order.

It sounds like you're trying to do something where you're splitting OS disks from data drives. If you're using the same size disks across the array, you may be better served by making a large RAID 1+0 and creating multiple HP Logical Drives. It's an option to consider.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-02-17)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。