问题原文
原帖链接 · user1079505 · CC BY-SA 4.0
I'd like to configure a pair of 4TB SSD drives in RAID1.
I consider that when in several years one of the drives fails, and I would want to exchange it, the exact model I have now might be unavailable.
I have impression that "4TB" isn't exactly the same size in various models from various manufacturers. I guess that if the replacement drive is even just slightly smaller than the one I use now, I would be unable to recreate the RAID array?
When configuring RAID1, should I leave some little not allocated space on the drives, to make sure I can use another SSD model as a replacement in the future? How much space should I leave? By how much the real capacity of the SSD drives may vary between various producers and models?
I consider that since it is not recommended to fill SSDs with data to 100% anyway, even if I leave 5% space not allocated to RAID, it should have no practical impact on the operation. Is my logic correct?
已采纳解答
原帖链接 · MrPontus · CC BY-SA 4.0
I'm trying to make a RAID 0 of two Samsung 860 EVO 2TB, one is manufactured in 2018 and the other one in 2019 at first the raid failed because there wasn't "enough free space" there is a less than 1MB difference in space on the drives even though it is the same exact model (one had 01 firmware and the other one 03, I updated both drives to the latest 04 firmware before trying to create this RAID) the array was created successfully when I choose the "smaller" drive first. I don't know how common this is, it has never happened to me before, I have just "decommissioned" a 8x1TB RAID 0 where all SSD had the exact same size. (yes I know I'm stupid doing RAID 0 with so many drives, but this is on my desktop with a minimum of a 3-2-1 backup of important data)
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
