大网数据广告活动
服务器运维问答

How to set up a VPN in a different subnet

· 52CE 我爱测

Let's suppose we have this configuration: . When I setup my VPN role in the Windows Server to allocate IPs to VPN clients from the range 192.168.1.10 to 192.168.1.20 everything works fine. However, when I want to isolate the VPN …

问题原文

原帖链接 · infotic · CC BY-SA 3.0

Let's suppose we have this configuration:

.

When I setup my VPN role in the Windows Server to allocate IPs to VPN clients from the range 192.168.1.10 to 192.168.1.20 everything works fine.

However, when I want to isolate the VPN clients in a different subnet (for example 192.168.2.0/24) then I don't know how to proceed. The connection to the VPN server works fine, my VPN client gets the address 192.168.2.2 for example, and is able to ping the server at 192.168.1.2, but can't see the other machines in 192.168.1.0/24 and can't reach the Internet though.

I know that I have to add some static route somewhere, but I don't really see where. Any pointer?

已采纳解答

原帖链接 · Cory Knutson · CC BY-SA 3.0

You are missing the route in your router for 192.168.2.0/24. You VPN clients can get to your local LAN. The clients would be responding to their default gateway, since they do not know where 192.168.2.0/24 is. That would need to be in your router's routing table, so that it can forward that traffic back to your Windows VPN server.

As a general rule, every router needs to have a route added for any subnet that is not directly connected.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-06-05)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。