大网数据广告活动
服务器运维问答

Freeradius VLAN assignment with EAP-TLS and WiFi 802.1x

· 52CE 我爱测

I'm using FreeRadius with a Ubitquiti WiFi AP with 802.1x auth using EAP-TLS (mutual client/server cert based auth). This is working well for static VLANs (i.e. specified on the AP). I'd like to offload the VLAN assignment to Rad…

问题原文

原帖链接 · user397220 · CC BY-SA 3.0

I'm using FreeRadius with a Ubitquiti WiFi AP with 802.1x auth using EAP-TLS (mutual client/server cert based auth). This is working well for static VLANs (i.e. specified on the AP).

I'd like to offload the VLAN assignment to Radius so that different users can be assigned to different VLANs.

I am not sure how to do this using EAP-TLS. All docs I've found online use the users file but are using other EAP methods.

So for, I've put this at the top of my /etc/freeradius/users file:

DEFAULT        Tunnel-Medium-Type = 6
               Tunnel-Private-Group-ID = [12],
               Tunnel-Type = VLAN

However no VLAN is assigned by Radius.

I'm not sure where to go from here. Perhaps I need something inside the tls section of /etc/freeradius/eap.conf to tell it to use the users file?

Help is appreciated, thanks!

已采纳解答

原帖链接 · user397220 · CC BY-SA 3.0

I managed to get this sorted. The solution was that the first line should be a "Check", then the remaining lines are replied.

This worked for me:

DEFAULT NAS-Port-Type == Wireless-802.11
        Tunnel-Type = 13,
        Tunnel-Medium-Type = 6,
        Tunnel-Private-Group-Id = "12"

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-01-26)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。