问题原文
原帖链接 · Greg0ry · CC BY-SA 3.0
I have following setup:
ip addr:
2: ens4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 01:12:23:34:45:5f brd ff:ff:ff:ff:ff:ff
inet xxx.xxx.xxx.xxx/24 brd xxx.xxx.xxx.xxx scope global ens4
valid_lft forever preferred_lft forever
inet 192.168.0.2/24 scope global ens4:1
valid_lft forever preferred_lft forever
inet 192.168.0.3/24 scope global secondary ens4:2
valid_lft forever preferred_lft forever
I would like to have all traffic from 192.168.0.2 destined to 192.168.0.3 to show as if the source was 192.168.0.3.
The reason is I have speciffic configuration on postgres that I cannot change. This postgres is only accepting connections when source is 192.168.0.3, so if source becomes 192.168.0.2 then connection will be refused.
The above questions is result of answer received here: How to add ip route to route traffic through interface when destination is also that interface (it is not possible to change source IP address with static routes when two aliases are configured within the same network)
The answer to following question seems to be related to my question although it does not result in rule being added: https://unix.stackexchange.com/questions/243451/iptables-change-local-source-address-if-destination-address-matches
I already tried following nat rules:
iptables -t nat -A POSTROUTING -o ens4 -j MASQUERADE
iptables -A FORWARD -i ens4 --source 192.168.0.2/32 -o 192.168.0.3 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i ens4 --source 192.168.0.2/32 -o 192.168.0.3 -j ACCEPT
Above derived from here: http://www.revsys.com/writings/quicktips/nat.html
已采纳解答
原帖链接 · Alexander Tolkachev · CC BY-SA 3.0
I've checked answer that you mentioned in your question and tried to configure iptables like it was mentioned there. Tested with nginx on my virtual machine with CentOS and it works.
Try to use this rule:
iptables -t nat -A POSTROUTING --destination 192.168.0.3/32 -j SNAT --to-source 192.168.0.3
In my case this rule work even with disabled IP Forwarding, so try it.
Update:
For all outgoing traffic you shoud use rule:
iptables -t nat -A POSTROUTING -j SNAT --to-source 192.168.0.3
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
