大网数据广告活动
服务器运维问答

tcptraceroute: Hop does not reply

· 52CE 我爱测

AFAIK tcptraceroute is the best tool to check if a firewall is blocking the tcp connection to a service. (If you know a better tool, please let leave a comment) Some hops do not reply. See * * * remotehost:~ # tcptraceroute ftp.e…

问题原文

原帖链接 · guettli · CC BY-SA 4.0

AFAIK tcptraceroute is the best tool to check if a firewall is blocking the tcp connection to a service. (If you know a better tool, please let leave a comment)

Some hops do not reply. See * * *

remotehost:~ # tcptraceroute ftp.example.com ftp
Selected device eth0, address 10.172.19.11, port 40768 for outgoing packets
Tracing the path to ftp.example.com (10.101.7.124) on TCP port 21 (ftp), 30 hops max
 1  * * *
 2  172.18.56.12  0.407 ms  0.222 ms  0.230 ms
 3  * * *
 4  * * *
 5  * * *
 6  * * *
 7  10.102.1.1  32.017 ms  31.728 ms  31.486 ms
 8  * * *
 9  10.101.7.124 [open]  31.728 ms  32.391 ms  33.549 ms

Is there a term for the behaviour of these hops?

How to call this, if the hop does not respond, and I see * * * in the output?

(Unfortunately I don't have 300 reputations and can't create the new tag "tcptraceroute")

Background: I would like to tell the people how are responsible for the network, that they should use routers which do NOW-I-AM-MISSING-THE-MAGIC-TERM.

已采纳解答

原帖链接 · Harrison Gibbs · CC BY-SA 4.0

There's not really an exact word for that, but to help you with your dialogue with those who manage that network you might look into CoPP (Control Plane Policing)

It's worth noting that the device may not actually be set to deny these packets, it may just be rate-limiting them, so if you want responses you can ask them exclude certain IPs from the rate limit or raise the limit for everything if that is desired.

I'll warn you that you might have a hard time getting the network team to make these changes as they are there to protect the device from DoS attacks or normal-use overload on the control plane.

From Cisco's docs, below are some of the effects that can be seen if the control plane is overloaded:

  • Reduced service quality (such as poor voice, video, or critical applications traffic)
  • High route processor or switch processor CPU utilization
  • Route flaps due to loss of routing protocol updates or keepalives
  • Unstable Layer 2 topology
  • Slow or unresponsive interactive sessions with the CLI
  • Processor resource exhaustion, such as the memory and buffers
  • Indiscriminate drops of incoming packets

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2018-09-06)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。