问题原文
原帖链接 · Centos Newbie · CC BY-SA 3.0
I am using KVM on Centos 7. I have created a VM with SR-IOV VFs to pass traffic. I notice that I am unable to pass traffic when I tag the interface inside the VM. I have read through the internet and the data sheet from Intel but none give me a clear picture of how it is done.
Server1
Eth0 - PF
SR-IOV Enabled
eth0-vf-1 (Attached to VM)
[Inside the VM]
Centos 7
eth0.100
Server2
Eth0 - PF
SR-IOV Enabled
eth0-vf-1 (Attached to VM)
[Inside the VM]
Centos 7
eth0.100
Switch
Extreme Networks
VLAN tagged 100
Port 1,2
Port 1 - Server 1 - Eth0 - PF
Port 2 - Server 2 - Eth0 - PF
Can anyone guide me through this? I would like to know if anyone has tried such a configuration or would this not be the best used case for SR-IOV?
I did find one issue here but did not understand much. Thank you community.
已采纳解答
原帖链接 · dyasny · CC BY-SA 3.0
I checked, and it looks like with VFs, the tagging needs to be done on the host, via libvirt. The way this looks in the domxml is as follows
<interface type='hostdev' managed='yes'>
<mac address=' fa:aa:aa:aa:aa:aa '/>
<driver name='kvm'/>
<source>
<address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x7'/>
</source>
<vlan>
<tag id='190'/>
</vlan>
<alias name='hostdev0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
