大网数据广告活动
服务器运维问答

PCIe 3.0 downgraded to 2.0 speed

· 52CE 我爱测

I have a dual Xeon board with Intel C602 chipset and two E5-2670 CPUs. The board comes with five PCIe 3.0 x16 slots and a PCIe 3.0 x4 slot; all of which are directly connected to the CPUs. I added a PCIe 3.0 card to a x16 slot co…

问题原文

原帖链接 · ypnos · CC BY-SA 4.0

I have a dual Xeon board with Intel C602 chipset and two E5-2670 CPUs. The board comes with five PCIe 3.0 x16 slots and a PCIe 3.0 x4 slot; all of which are directly connected to the CPUs.

I added a PCIe 3.0 card to a x16 slot connected to the first CPU ("BSP") as well as another card to the x4 slot (also connected to BSP). In both cases I find the that they are downgraded to PCIe 2.0 speed.

# lspci -vvs 82:00.0 | egrep '(82:00|GT)'
82:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981 (prog-if 02 [NVM Express])
            LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
            LnkSta: Speed 5GT/s (downgraded), Width x4 (ok)
            LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
# lspci -vvs 02:00.1 | egrep '(02:00|GT)'
02:00.1 Ethernet controller: Intel Corporation Ethernet Controller 10G X550T (rev 01)
            LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <16us
            LnkSta: Speed 5GT/s (downgraded), Width x4 (ok)

How may I assess why the link speed was downgraded and possibly rectify the problem?

已采纳解答

原帖链接 · Mike Smith · CC BY-SA 4.0

Have you tried reviewing the BIOS, I have found a few times now you can set the PCI-E slots to either work on revision 2.0 or 3.0. If its set to 2.0 in the BIOS the cards will only work at 2.0 even though the card and slot theoretically both support 3.0.

Mike

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2018-09-25)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。