问题原文
原帖链接 · uncovery · CC BY-SA 4.0
I am using Android to connect to my WireGuard server through the public IP address of the host network. The LAN is using addresses 192.168.0.1-255. I would like the client to connect through the VPN only to addresses with in the LAN and directly access the others. The config is as follows:
[Interface]
PrivateKey = xxx=
Address = 198.18.7.4/32
DNS = 192.168.0.1
[Peer]
PublicKey = xxx=
AllowedIPs = 192.168.0.1/24
Endpoint = my.public.IP:51820
But I am getting a "Bad Address" for whatever I tried to use except for /32. Not being familiar with Subnet Address scheme, I tried to use the table and calculator here which seems to tell me that /24 is the correct subnet. On Windows this seems to work fine.
Any Idea what can be wrong here? Is the AllowedIPs wrong? Or is there an issue with Android that is not in my control?
Thanks!
已采纳解答
原帖链接 · Justin Ludwig · CC BY-SA 4.0
Your AllowedIPs setting is wrong -- it must be a proper subnet: 192.168.0.0/24, not 192.168.0.1/24.
(It's confusing because the Address setting can be specified using the same notation -- eg 198.18.7.4/24 -- but in that case, it means the interface's address is 198.18.7.4 on the 198.18.7.0/24 subnet.)
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
