大网数据广告活动
服务器运维问答

How to access both server and ILO with a single link?

· 52CE 我爱测

I have a server in a datacenter that offer 1 link, one interface IP and several logical IPs. The server is currently running on XEN with the physical IP on the main interface and other IPs assigned to VPS. The server has a second…

问题原文

原帖链接 · nowox · CC BY-SA 3.0

I have a server in a datacenter that offer 1 link, one interface IP and several logical IPs. The server is currently running on XEN with the physical IP on the main interface and other IPs assigned to VPS.

The server has a second ILO port (currently not used) that I want to connect through the standard link. Using a 2 ports switch is not a solution because I have two interfaces and the provider only offer 1 interface IP (I don't really understand what is the purpose of the interface IP except that it should not be normally used to access the server and it is not on the same subnet that the other IPs).

What solution can I use to access both the ILO port and the server with one link ?

My idea is to consume one IPv6 (I have plenty of them) for ILO and connect both the server and the ILO port using a 2 ports switch. Is that possible?

已采纳解答

原帖链接 · Chopper3 · CC BY-SA 3.0

Ok, thanks for the update, you've got iLO version 4, which does indeed allow you to do what you want. You need to go into your iLO settings and select the 'Network' tab on the left, then select 'Shared Network Port' and 'General' - make your settings and you're away! You may need to restart iLO for these changes to take effect.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-08-01)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。