大网数据广告活动
服务器运维问答

Is it possible to have a link between a 10GbE NIC and 1GbE Switch with a SFP+ DAC?

· 52CE 我爱测

I've just installed an Intel 82599 based NIC with 2 SFP+ ports in my server. Right now I have a PowerConnect 2824 switch, which has 2 1Gb SFP ports. I tried linking them with a 10Gb SFP+ DAC (a 10gtek, bought as compatible with D…

问题原文

原帖链接 · Rodrigo Gómez · CC BY-SA 3.0

I've just installed an Intel 82599 based NIC with 2 SFP+ ports in my server. Right now I have a PowerConnect 2824 switch, which has 2 1Gb SFP ports.

I tried linking them with a 10Gb SFP+ DAC (a 10gtek, bought as compatible with Dell), but there was no way I could make it work. The Switch always showed the port as down, and so did the card.

I was not able to change the speed in the Card to make it 1Gb, so I guess the cable is only good for 10Gb, although in the specs it says it handles 1-10Gb.

This is only temporary: we are waiting for a new switch (Dell X1052) that has 4 10Gb SFP+ ports, where I hope everything will work fine, but I was trying to setup the link already with the existing equipment if possible.

已采纳解答

原帖链接 · ewwhite · CC BY-SA 3.0

I'd suggest a pair of Copper SFP adapters to connect things temporarily.

The cable you have likely isn't compatible. The PowerConnect 2824 doesn't have SFP+ ports (only SFP).

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-03-15)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。