大网数据广告活动
服务器运维问答

Could a D-Link managed switch be causing intermittent connectivity/DHCP issues for clients on a LAN

· 52CE 我爱测

I use a Draytek 2860 router to manage an office internet connection. This feeds a WAN connection into a managed switch (D-Link DGS 1210 24), and the ports on the switch are then connected to a basic switchboard which then servers…

问题原文

原帖链接 · shaneoh · CC BY-SA 3.0

I use a Draytek 2860 router to manage an office internet connection. This feeds a WAN connection into a managed switch (D-Link DGS 1210 24), and the ports on the switch are then connected to a basic switchboard which then servers connections to multiple ports around the office.

We constantly have connection issues with LAN connections only whereby these drop off despite the internet connection being fine and wireless connections being unaffected. Disconnecting and reconnecting any ethernet cables from the router resolves these, as does disabling and enabling the LAN card on a particular client.

Discussion on the Draytek forum has lead me to the conclusion that something in our network is attempting to serve IP addresses without my knowledge and this seems the most likely culprit, especially as I wasn't aware the switch was managed and I accessed the UI for the first time ever today. However, it seems to be in default mode, i.e. almost everything disabled.

Is it possible this is causing the issue and can anyone suggest settings which could be checked to make sure it isn't? Removing the switch altogether would be problematic right now as I don't have a simple one to replace it with and we need the various ports in the office.

Essentially, I want this switch to only provide me with the ability to power multiple ports. I require nothing else from the switch. What's the best way to confirm this is what I am getting?

EDIT

After the suggestion from Bryan Cerrati below I have installed Wireshark. However whenever I connect a device to the network I can see a DHCPRequest transaction but there is no corresponding DHCPOffer (although the client does connect successfully). Is the information I need located inside the Request?

已采纳解答

原帖链接 · Marlon Anjos · CC BY-SA 3.0

This switch has a DHCP Server Screening protection under Security Settings, you can try to enable this if you think that someone is running another DHCP Server. You could also see the switch log for some error.

When this problem happens, they have another ip address? You can use the command ipconfig /all to see what is the ip of the machine that served the ip address.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-11-01)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。