问题原文
原帖链接 · DirtDiver · CC BY-SA 3.0
a local company sponsored our university a bladecenter (HP c7000) equipped with 16 HP c460 blades. Our main issue is, that we don't know at which network speed the blades talk to each other.
Our goal is:
- building a private cloud with opennebula on 15 blades
- use the 16th blade as storage (maybe we buy a hp 2200sb storage blade)
Our network setup is:
- Gigabit Ethernet ports at the back of the blade system
- the local network controllers in the blades should be capable to use 10 gigabit ethernet?
To plan further, we want to at which speed do the blades communicate to each other over TCP/IP? E.g.: Blade 1 to Blade 3 file transfer.
已采纳解答
原帖链接 · ewwhite · CC BY-SA 3.0
It depends on the server generation.
The downplane connections of G6 and newer blades have the capability of 2 x 10GbE LOMs per server.
While your backplane connections sound like they're 1GbE, the blades should be able to communicate at 10GbE between other blades housed within the same chassis.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
