问题原文
原帖链接 · Csaba Toth · CC BY-SA 3.0
I have a Windows Server 2012 R2 Essentials host with 1 NIC and I installed a Hyper-V guest of the same type (Windows Server 2012 R2 Essentials). I added an external virtual switch (allowing management operating system to share this adapter) and the VM is connected to that. The guest doesn't indicate internet connection and when I try to repair it, the analysis concludes with a "Ethernet" doesn't have a valid IP configuration.
According to what I've read this should be enough for the VM to see the internet. The host computer has connection, I can browse the web.
Host:
Ethernet adapter vEthernet (Internal Virtual Switch):
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::f06b:9607:17f9:f2e8%37
Autoconfiguration IPv4 Address. . : 169.254.242.232
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
Ethernet adapter vEthernet (External Virtual Switch):
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2602:304:791c:4270:3cfc:fd08:c467:3f3c
Link-local IPv6 Address . . . . . : fe80::3cfc:fd08:c467:3f3c%21
IPv4 Address. . . . . . . . . . . : 192.168.1.253
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::6655:b1ff:fe6d:a1f0%21
192.168.1.254
Guest:
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::2d32:ed0b:c32e:d13b%12
Autoconfiguration IPv4 Address. . : 169.254.209.59
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
I also have some other devices (one tunnel on the guest) and a whole bunch on the host because I tried to go with Internal Virtual Switch by desperation, so I installed RRAS and configured VPN and DirectAccess to enable NAT. That didn't help either, but I need External Switch anyway, because I want to connect to the VM through RDP from home.
What am I doing wrong?
Update: according to the advice I configured the guest's NIC's IPv4 to:
IP 192.168.1.221
netmask 255.255.255.0
gw 192.168.1.254
It still doesn't see the net. ARP table on the host:
Interface: 127.0.0.1 --- 0x1
Internet Address Physical Address Type
224.0.0.22 static
224.0.0.251 static
224.0.0.252 static
224.0.0.253 static
232.242.254.169 static
239.255.255.250 static
Interface: 192.168.1.253 --- 0x15
Internet Address Physical Address Type
169.254.242.232 00-00-00-00-00-00 invalid
169.254.255.255 00-00-00-00-00-00 invalid
192.168.1.221 00-00-00-00-00-00 invalid
192.168.1.252 10-bf-48-7e-18-58 dynamic
192.168.1.253 00-00-00-00-00-00 invalid
192.168.1.254 64-55-b1-6d-a1-f0 dynamic
192.168.1.255 ff-ff-ff-ff-ff-ff static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.0.253 01-00-5e-00-00-fd static
232.242.254.169 01-00-5e-72-fe-a9 static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
已采纳解答
原帖链接 · Csaba Toth · CC BY-SA 3.0
It was the VLAN ID. If I recall it correctly, when you created the External Virtual Switch, the VLAN ID checkbox was disabled. When I added the VM to that External Switch, the VM was enabled and set to 2. I needed to uncheck that VLAN ID on the VM network settings, and that solved the problem, the ARP tables started to populate on both ends and the host and the guest can ping each other now. They are on the same subnet of course.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
