问题原文
原帖链接 · Tsu Wei Quan · CC BY-SA 3.0
I would like to ask if my method of migrating from existing Raid 1 to Raid 10 will cause any data loss.
I currently have a Synology DS 1515+, 5 Bays with 2 HDD in placed.
- 1st bay : 5Tb
- 2nd bay : 5Tb
Currently, it's in raid 1 and one of the disk failed (System Partition Failed).
Luckily, i can still access my data, except with no redundancy.
I had a plan to purchase 3 more 5Tb HDD in order to migrate to raid 10.
- Insert disk 5, do a full copy from raid 1 data to disk 5
- once completed, insert disk 1 to 4
- Do a full format and creates raid 10
- After Raid 10 completes, copy backed up files from Disk 5 to Raid 10 Volume
- Leaves Disk 5 as a spare for any fail Hdd in the future.
I hope this could work without losing any data, hopefully this is the right way to safely migrate from raid 1 to raid 10.
Hence i would like to seem confirmation that this method would work.
Thanks all.
已采纳解答
原帖链接 · B00TK1D · CC BY-SA 3.0
Yes, the steps you described should work. However, if your current single disk were to fail while you were copying data to disk 5, then you would loose all data. Therefore, I would suggest adding a step before step 1: insert a disk into bay 2 and regenerate the existing RAID 1 data onto disk 2, so you have a full RAID 1 backup of your data. Then, continue with the steps as you outlined them; insert disk 5, copy the data from the existing RAID 1 to disk 5, create the RAID 10, and copy the data from disk 5 to the RAID 10.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
