大网数据广告活动
服务器运维问答

No network after Windows Server upgrade

· 52CE 我爱测

Last night I started upgrading a server from Windows Server 2008 R2 to Windows Server 2012 R2. This morning checking if everything went well, the network card says "unidentified network" and "no Internet access". DHCP does not wo…

问题原文

原帖链接 · T'lash · CC BY-SA 3.0

Last night I started upgrading a server from Windows Server 2008 R2 to Windows Server 2012 R2. This morning checking if everything went well, the network card says "unidentified network" and "no Internet access". DHCP does not work, and neither does ping when I switch back to static IP. There is nevertheless incoming and outgoing traffic. I tried to update the drivers of the network card as well as its firmware, but nothing changes. I tried to connect a USB network adapter, but the problem remains the same; the problem seems to come from Windows and not the card or drivers. So I tried to run the command "netsh winsock reset" and then restart, but here it does not work.

I do not know what to do while it is imperative that this server works before Monday morning.

Thank you for your help.

EDIT 1:

I tried that without more results:

netsh int ip reset C:\logreset.txt
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global rss=enabled
netsh int tcp show global

已采纳解答

原帖链接 · T'lash · CC BY-SA 3.0

Murphy hit again! During the night the port of the switch to which the server was connected is dead. The switch communicates with the connected equipment but the port is isolated from all the rest of the network ...

Coincidence or not? I don't know.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-11-11)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。