大网数据广告活动
服务器运维问答

Unable to access Qnap NAS device

· 52CE 我爱测

I have a Qnap NAS connected to Qnap QSW-M2108-2C managed switch. That switch has one port leading to the internet and another port connected to a MacBook running Qfinder Pro. Everything was working fine and I was able to connect …

问题原文

原帖链接 · hughesdan · CC BY-SA 4.0

I have a Qnap NAS connected to Qnap QSW-M2108-2C managed switch. That switch has one port leading to the internet and another port connected to a MacBook running Qfinder Pro. Everything was working fine and I was able to connect to the NAS successfully over the network. However, after relocating all of the above gear to a new location I have not been able to successfully connect and I cannot figure out what is the problem. All of the devices seem to be acquiring new IP addresses over DHCP and on an initial scan Qfinder sees the NAS. But there is an orange exclamation point in the status column and attempts to connect fail followed by the NAS disappearing from Qfinder on subsequent scans.

I've included some screen shots to illustrate the problem. Can someone point me to the solution? I've tried rebooting the switch and using a different MacBook. I have not rebooted the NAS for the simple reason that I cannot connect to it to shut it down safely. I do not want to risk my data with a hard reboot.

EDIT - I've also just tried the following but the problem persists

  • Rebooted using the button on the front of the 653D NAS. Apparently you can do a safe shutdown by holding the button for three seconds. This is not documented in the official manual but is mentioned by users on the Qnap forums.
  • Reset the NAS settings by holding the reset button for three seconds

已采纳解答

原帖链接 · lsk · CC BY-SA 4.0

As a rule of thumb, if you relocate your gear often and you are "guest" on someone's else network (The switch is also connected to a hotel ethernet port...) you should create your own subnet even with a cheap router to be put between your subnet (switch, nas and macbook) ant the external network. This way you control what's happening inside and you mask your devices from the outside, other than aving the possibility to troubleshoot more accurately.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2021-12-23)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。