大网数据广告活动
服务器运维问答

RAID controller link speed with mixed drive types

· 52CE 我爱测

What will be the negotiated speed if I mix 6 and 12gbps SATA and SAS drives in a single h/w RAID controller, but keep them in the separate raid groups? Let's take LSI (Dell PERC H730) as an example with 2 x SATA @6Gbps in RAID1 a…

问题原文

原帖链接 · Lubos A. · CC BY-SA 4.0

What will be the negotiated speed if I mix 6 and 12gbps SATA and SAS drives in a single h/w RAID controller, but keep them in the separate raid groups? Let's take LSI (Dell PERC H730) as an example with 2 x SATA @6Gbps in RAID1 and 2 x SAS @12Gbps in RAID1 in another. Will the SAS disks negotiate to their max of 12 or step down to 6?

已采纳解答

原帖链接 · shodanshok · CC BY-SA 4.0

Link speed negotiation is done on a per-port basis, so it should be possible to have SATA 3.0 (6 Gb/s) and SAS 3.0 (12 Gb/s) connected to the same PERC card at maximum speed.

However, you can not (and should not) mix them in the same virtual disk / array. In other words, keep them in separate array and all should works without issues.

From PERC H730 manual:

Combining SAS and SATA hard drives within a virtual disk is not supported. Also, combining hard drives and solid state drives (SSDs) within a virtual disk is not supported

No similar statements is done for mixing SATA 3.0 and 6.0 Gpbs drives, and omreport storage pdisk controller=0 reports link speed on a per-drive basis.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2020-06-15)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。