问题原文
原帖链接 · bagratte · CC BY-SA 4.0
Consider the following /etc/exports:
/verbatim 192.168.0.0/255.255.255.0(rw,sync,no_subtree_check)
/sandisk 192.168.0.0/255.255.255.0(rw,sync,no_subtree_check)
/verbatim and /sandisk are mountpoints of external hard drives defined in /etc/fstab as follows:
/dev/disk/by-uuid/06b24834-a749-4d93-b0d5-a6da71eaf224 /verbatim ext4 defaults 0 1
/dev/disk/by-uuid/d7dbea69-0332-4d12-b905-b9a116e28422 /sandisk ext4 defaults 0 1
Now, if any of these hard drives fails to mount - for example when it's powered off or uplugged - NFS server fails to start. These are what I believe the relevant entries in journal:
Sep 23 09:45:26 lilo systemd[1]: dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.device: Job dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.device/start timed out.
Sep 23 09:45:26 lilo systemd[1]: Timed out waiting for device SAMSUNG_HD204UI 1.
Sep 23 09:45:26 lilo systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/06b24834-a749-4d93-b0d5-a6da71eaf224.
Sep 23 09:45:26 lilo systemd[1]: Dependency failed for /verbatim.
Sep 23 09:45:26 lilo systemd[1]: Dependency failed for NFS server and services.
Sep 23 09:45:26 lilo systemd[1]: nfs-server.service: Job nfs-server.service/start failed with result 'dependency'.
Sep 23 09:45:26 lilo systemd[1]: verbatim.mount: Job verbatim.mount/start failed with result 'dependency'.
Sep 23 09:45:26 lilo systemd[1]: systemd-fsck@dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.service: Job systemd-fsck@dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.service/start failed with result 'dependency'.
Sep 23 09:45:26 lilo systemd[1]: dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.device: Job dev-disk-by\x2duuid-06b24834\x2da749\x2d4d93\x2db0d5\x2da6da71eaf224.device/start failed with result 'timeout'.
Is there any way I can configure NFS server to start and serve the other drives (sandisk) even if some drives can't be mounted (verbatim)?
已采纳解答
原帖链接 · bagratte · CC BY-SA 4.0
Use mountpoint or mp in /etc/exports :
mountpoint=path
mp
This option makes it possible to only export a directory if it has successfully been mounted. If no path is given (e.g. mountpoint or mp) then the export point must also be a mount point. If it isn't then the export point is not exported. This allows you to be sure that the directory underneath a mountpoint will never be exported by accident if, for example, the filesystem failed to mount due to a disc error.If a path is given (e.g. mountpoint=/path or mp=/path) then the nominated path must be a mountpoint for the exportpoint to be exported.
/verbatim 192.168.0.0/255.255.255.0(rw,sync,no_subtree_check,mountpoint)
/sandisk 192.168.0.0/255.255.255.0(rw,sync,no_subtree_check,mountpoint)
Also, consider using auto,nofail in /etc/fstab so that operating system boots if external disks are unplugged or powered off:
/dev/disk/by-uuid/06b24834-a749-4d93-b0d5-a6da71eaf224 /verbatim ext4 auto,nofail 0 1
/dev/disk/by-uuid/d7dbea69-0332-4d12-b905-b9a116e28422 /sandisk ext4 auto,nofail 0 1
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
