问题原文
原帖链接 · Livy · CC BY-SA 4.0
If I build a RAID 5 array (specifically MD RAID on Linux) and then 1 of the drives disconnects for whatever reason, does that drive need to be rebuilt from scratch if:
- No data has been written to the array.
- Some data has been written to the array.
By "scratch", I mean full data rebuilt instead of rebuilding differential data since the last time the drive was online.
已采纳解答
原帖链接 · NStorm · CC BY-SA 4.0
That depends on.
When you disconnect your drive from RAID 5 array a complete array rebuild would be required once you put back drive on online. There is no way for the system to know that this drive are still has the same data as it had before going offline.
I mean while the drive are offline it's data could be modified by some other means. And "trusting" it while the drive are back online could be a disaster for data consistency.
You can enable a write-intent bitmap or journal mode of data consistency. See --bitmap & --consistency-policy options of mdadm for this. But in no way it guarantees that full rebuild won't take place after actually removing & reconnecting the drive I guess. For example if you have hot spare added to array it will start rebuilding array to hot spare as soon as you remove the drive.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
