大网数据广告活动
服务器运维问答

Adding SAS/RAID controller disables network ports. Why?

· 52CE 我爱测

I've built a NAS that has been running well for months. I recently decided to add a LSI MegaRAID SAS 9260CV-8i L3-25377-02B 8 Port 6GB/S SAS RAID Controller to it with a couple of additional 12TB HHDs (shucked EasyStores). For so…

问题原文

原帖链接 · mdrichardson - MSFT · CC BY-SA 4.0

I've built a NAS that has been running well for months. I recently decided to add a LSI MegaRAID SAS 9260CV-8i L3-25377-02B 8 Port 6GB/S SAS RAID Controller to it with a couple of additional 12TB HHDs (shucked EasyStores). For some reason, when the SAS/RAID controller is added, my network ports on my Intel i350-T4 stop working--the lights blink but I don't get any network connectivity.

My NAS runs Proxmox, and when it starts, it says "Failed to raise network interfaces". If I run journalctl -u networking.service, it says "Cannot get device ring settings. No such device exists".

I feel like I'm probably missing something obvious as I've never added a SAS or RAID card before. What gives?

已采纳解答

原帖链接 · mdrichardson - MSFT · CC BY-SA 4.0

Apparently, just plugging in a new PCIe card changed the interface name. I just needed to ip link show to get the new names, then update them in /etc/network/interfaces

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2020-05-25)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。