问题原文
原帖链接 · Panos · CC BY-SA 3.0
I've just installed Jenkins with its default configs on a Centos 7 physical box.
Port 8080 is open on the firewall:
sudo iptables -L -n
[...]
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080
[...]
It also looks like Jenkins is actually listening on all interfaces:
sudo netstat -an | grep "LISTEN "
[...]
tcp6 0 0 :::8080 :::* LISTEN
[...]
I can curl localhost:8080 locally (from the Centos box) without a problem, but from anywhere else in the network I get a Connection refused.
Am I missing something?
已采纳解答
原帖链接 · Bombaci · CC BY-SA 3.0
The above looks like Jenkins is defaulting to ipv6 only.
Try the following, this will probably fix your problem:
run:
$ /sbin/sysctl net.ipv6.bindv6only
You will probably get an output with value net.ipv6.bindv6only = 1.
If this is the case, you will need to disable the setting:
sudo /sbin/sysctl net.ipv6.bindv6only=0
After the command above you will get an answer like net.ipv6.bindv6only = 0, restart Jenkins: sudo systemctl restart jenkins and try to connect to Jenkins again.
If this worked for you, you should put this in a sysctl config-file. Because this is not a persistent fix. After a reboot the setting you just have modified will be defaulted to 1 again.
Check /etc/sysctl.conf and /etc/sysctl.d/* and add net.ipv6.bindv6only = 0 in order to make this setting permanent and run sudo sysctl -p or restart after changing it.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
