问题原文
原帖链接 · fl0cke · CC BY-SA 3.0
Stateless Adress Autoconfiguration allows a node on the link to automatically configure global IPv6 addresses by appending its interface identifier (64 bits) to the prefix (64 bits) advertised by the router.
Lets assume I have a server with the global IPv6 Adress
2001:0db8:85a3:08d3:1319:8a2e:0370:7347
Now i want to add another global IPv6 address to the same interface by changing just the interface identifier and keeping the prefix. e.g.
2001:0db8:85a3:08d3:3315:2b5e:a320:3254
-------same--------|-----different-----
How can i do that using SLAAC, where the interface identifier is automatically appended to the network prefix? I am currently using Ubuntu.
(This is similar to what the IPv6 Privacy Extension does, but i want to control adding and removing temporary IPv6 addresses myself.)
已采纳解答
原帖链接 · Michael Hampton · CC BY-SA 3.0
At the moment, I'm not aware of any method for manually causing the system to switch to a new temporary address.
However, you can tune the time period in which a temporary address is used and cause the system to create them more frequently.
From the kernel documentation:
temp_valid_lft - INTEGER
valid lifetime (in seconds) for temporary addresses.
Default: 604800 (7 days)
temp_prefered_lft - INTEGER
Preferred lifetime (in seconds) for temporary addresses.
Default: 86400 (1 day)
(Yes, the misspelling is intentional...)
So, let us say you want the system to start using a new temporary address every 10 minutes. You will then set:
sysctl net.ipv6.conf.all.temp_prefered_lft=600
sysctl net.ipv6.conf.default.temp_prefered_lft=600
The other sysctl, temp_valid_lft, allows some extra time for existing connections using a temporary address to finish up. You can also reduce this, especially if you don't anticipate long running connections. Here I reduce it to 1 hour:
sysctl net.ipv6.conf.all.temp_valid_lft=3600
sysctl net.ipv6.conf.default.temp_valid_lft=3600
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
