大网数据广告活动
服务器运维问答

Exchange IMAP Setup SSL & TLS

· 52CE 我爱测

Regarding set-up of IMAP on exchange 2010 sp3, there are a couple of things I don't understand. 1) I have SSL v2 & v3 disabled on the server via registry. So how are clients able to connect to the exchange server on port 993 with…

问题原文

原帖链接 · Nicholas · CC BY-SA 3.0

Regarding set-up of IMAP on exchange 2010 sp3, there are a couple of things I don't understand.

1) I have SSL v2 & v3 disabled on the server via registry. So how are clients able to connect to the exchange server on port 993 with SSL enabled? Is it actually falling back to no security or falling forward to TLS?

2) According to the below dialogue, TLS should use port 143, but also no encryption should use port 143. So which is it? Is it purely controlled by the next tab 'Authentication'?

3) With the IMAP receive connector shown below, does the 'Integrated Windows Authenication' also only operate after the TLS connection is established or does it work outside the TLS connection?

已采纳解答

原帖链接 · Esa Jokinen · CC BY-SA 3.0

Port 993 is for direct SSL/TLS and the default IMAP port 143 uses opportunistic TLS i.e. STARTTLS command to establish secured connection within the plain text connection.

Both uses only ciphers you allow, so even while the port 993 is reserved for "SSL" the connection will be TLS if configured that way.

FastMail's article SSL vs TLS vs STARTTLS covers this topic pretty well and also explains your confusion:

One significant complicating factor is that some email software incorrectly uses the term TLS when they should have used STARTTLS.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-10-03)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。