大网数据广告活动
服务器运维问答

VMWare vSphere packet loss

· 52CE 我爱测

I have a Dell Blade Enclosure with 14 blades and ESXi 5.5 on it. On blade 7 and 14 I have round about 65 % packet loss when I ping the ESXi Management interface. On all other blades there ist no packet loss. The strange thing is,…

问题原文

原帖链接 · ThoBe · CC BY-SA 3.0

I have a Dell Blade Enclosure with 14 blades and ESXi 5.5 on it. On blade 7 and 14 I have round about 65 % packet loss when I ping the ESXi Management interface. On all other blades there ist no packet loss. The strange thing is, I have this packet loss when I ping from:

blade 1 to blade 7 = 65% packet loss

but, when I ping from blade 7 to blade 1 at the same time I ping from blade 1 to blade 7 I have no packet loss at all ... not from 1 to 7 norr from 7 to 1

blade 1 to blade 7 and blade 7 to blade 1 = 0% packet loss

I have increased the Rx buffer in the ESX CLI but it doesn´t help. When I do a esxtop and go to the networktab I don´t see any packetdrop

PORT-ID USED-BY TEAM-PNIC DNAME PKTTX/s MbTX/s PKTRX/s MbRX/s %DRPTX %DRPRX 33554433 Management n/a vSwitch0 0.00 0.00 0.00 0.00 0.00 0.00 33554434 vmnic0 - vSwitch0 22.73 0.04 44.50 0.10 0.00 0.00 33554435 Shadow of vmnic0 n/a vSwitch0 0.00 0.00 0.00 0.00 0.00 0.00 33554436 vmnic1 - vSwitch0 43.39 0.08 1.91 0.00 0.00 0.00 33554437 Shadow of vmnic1 n/a vSwitch0 0.00 0.00 0.00 0.00 0.00 0.00 33554438 vmk0 all(2) vSwitch0 3.66 0.01 1.91 0.00 0.00 0.00

The only thing I see that there are massive interrupts for 0xef:

VECTOR COUNT/s TIME/int COUNT_0 COUNT_1 COUNT_2 COUNT_3 COUNT_4 COUNT... 0xef 4435.5 1.0 309.2 275.6 402.9 30.5 339.0 15.3 ...

The switch logfile shows me, that the blade network card is flapping sometimes, when I say sometimes I mean once or twice a week for about 1 or 2 minutes.

I don´t think that`s the reason for that but I haven´t any idea anymore what can be the problem. Especially the ping and counter ping situation don´t make any sense to me. Maybe you can help me?

已采纳解答

原帖链接 · ThoBe · CC BY-SA 3.0

I found the problem and a solution.

The packet loss was caused by identical MAC-addresses on different switch ports.

The virtual interface VMK0 Blade 7 had the same MAC as the hardware interface of Blade 11.

So what I've done is this: I gave the VMK0 interface a new MAC address. For that I go over the iDRAC interface of the Blade Enclosure and loging into the ESXi "GUI". I removed my both networkcards from the Administration interface, restart the Management Network, added them and restart the Management Network again. So I had some downtime but after that the MAC address was changed and there was no packet loss anymore.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-03-02)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。