问题原文
原帖链接 · Zeno · CC BY-SA 3.0
I have a server with 10 drives, looking to set up RAID 1 on the first 2 drives (for the OS) and RAID 10 on the remaining 8 (for database).
When I'm rolling through this set up in Dell Lifecycle Controller, I finish the first RAID fine. When I set up the second RAID on the remaining 8 drives, I get a warning:
If any modifications are applied, the virtual disk configuration is lost on all the virtual disks in the system.
If I go through with this, it indeed does wipe out my RAID 1 setup I made earlier.
What am I missing? How would one set up accomplish this set up?
Controller: PERC H730 Integrated RAID Controller, 1GB Cache
已采纳解答
原帖链接 · Jarrod L. J. Gibson · CC BY-SA 3.0
H730 can definitely do multiple raid. It sounds like you might have selected the two disks that are already assigned to your RAID1 while creating your RAID10.
This article could help guide you through the setup process: http://www.thegeekstuff.com/2012/03/dell-server-perc-h700-create-raid/
Also, try making sure your BIOS and RAID controller firmware are fully updated.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
