大网数据广告活动
服务器运维问答

HP SAS Expander 12Gb max storage limitations

· 52CE 我爱测

Is the max storage limitation stated in HP's documentation a real limitation or not? I currently have 48TB (8x 6TB in a raid 6) and I just purchased a Norco RPC-4224 and 8 additional drives to double my capacity to 96TB I was pla…

问题原文

原帖链接 · chansearrington · CC BY-SA 3.0

Is the max storage limitation stated in HP's documentation a real limitation or not?

I currently have 48TB (8x 6TB in a raid 6) and I just purchased a Norco RPC-4224 and 8 additional drives to double my capacity to 96TB

I was planning on using a HP 12Gb SAS Expander (769635-B21) along with my LSI 9260-8i but in the spec sheet is says that that the SAS expander is limited to: "Up to 90TB of total storage with 15 x 6TB 3.5" SATA MDL HDD"

Is this true?

I've read about a lot of people purchasing this product to use with the Norco RPC-4224 and I haven't seen many of them using SAS drives.

Is there really a limit to 90TB and 15 SATA drives?

I've been reading and searching over at hard forums and haven't found an answer yet.

已采纳解答

原帖链接 · ewwhite · CC BY-SA 3.0

There's no way to really know. The expander is a basic PCIe card. If you see anything on the HP spec sheet, it's likely geared towards an audience who plan to use the expander with HP server equipment.

Your use case is not who they're writing the documentation for. However, I don't see any reason you'd run into problems with your setup.

That said, I have one of these expanders in one of my HP storage servers. It should work for what you're doing.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-05-18)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。