大网数据广告活动
服务器运维问答

Win10 can not access one port on one site when connected through my network

· 52CE 我爱测

I’m doing some work for a company and need to use their VPN to do so. However I’m having problems, quite strange problems. The company’s VPN configuration and client software is available on https on domain.com:10443 (several oth…

问题原文

原帖链接 · fsteff · CC BY-SA 4.0

I’m doing some work for a company and need to use their VPN to do so. However I’m having problems, quite strange problems.

The company’s VPN configuration and client software is available on https on domain.com:10443 (several other services are available on other ports - none of these have problems ).

If I use any of my Win10 PC’s to connect to port 10443 of the domain while connected through my local LAN, the connection times out. (This happens in the browser and also using curl or telnet). Any service on other port are accessible.

If I instead of Win10 use MacOS, Linux, iPhoneOS or Android connected through my local LAN, the connection to port 10443 opens immediately and the VPN connection can be established.

And,if I move my Win10 PC’s to another Network, such as my neighbors or share my phones data as a hotspot, they can easily access the port. :-/ All of the connected networks have been selected as Private when prompted by the OS.

Thinking there had to be some sort of block in Windows I checked and even disabled the firewall, I also installed and tested a test-server on port 10443 and also tested with the external http://portquiz.net:10443/ and in no cases did I find any blocks.

I have also tried to use IP’s instead of the DNS name, but that didn’t change anything either.

I’m beginning to think the problem may not be 100% on my side.

I’m guessing the Win10 instances must send something in a header that the others do not or the other way around and that the VPN server then choose to ignore my requests based on something in the header, but I’m very open to other suggestions.

Any advice on how to debug this?

Thanks in advance.

已采纳解答

原帖链接 · fsteff · CC BY-SA 4.0

In order to debug further:

I ended up setting up Wireshark to capture WAN and LAN traffic on my Ubiquity Security Gateway using ssh packet monitoring (Note, must be selected together with Cisco support during installation of Wireshark on Windows.)

Debugging revealed domain.com:10443 did send responses to requests from all computers on my network, but this response disappeared for unknown reasons in the USG if going to a Windows computer.

At this point I contacted Ubiquity Support, to help identify the root cause for this. They didn't find a solution before I coincidently found a fix.

How it was finally fixed:

By coincidence, I discovered that my ISP was setting a wrong IP (not my public IP) on my WAN connection, and it turned out they had left a NAT turned on. Once this was corrected, the USG stopped filtering responses to Windows computers.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2020-12-19)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。