大网数据广告活动
服务器运维问答

Ratelimit IPs for UDP traffic in ipset list before being sent over GRE tunnel

· 52CE 我爱测

I am using nat DNAT to forward traffic on a certain port to another Centos server over a GRE tunnel however I want to rate limit a bunch of datacenter IPs I have in a ipset list 'blacklist'. So that the traffic outputted to the t…

问题原文

原帖链接 · Rushy · CC BY-SA 4.0

I am using nat DNAT to forward traffic on a certain port to another Centos server over a GRE tunnel however I want to rate limit a bunch of datacenter IPs I have in a ipset list 'blacklist'. So that the traffic outputted to the tunnel is rate limited.

I have tried rate limiting in all FORWARD, INPUT and OUTPUT lists however the rate limit does not work at all in any of them - maybe the nat DNAT bypasses it?.

iptables -A INPUT -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP
iptables -A FORWARD -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP
iptables -A OUTPUT -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP

If I add the list to drop via 'iptables -A OUTPUT -m set --match-set blacklist src -j DROP' it stops all traffic, so my IP ipset list is working just not the rate limiting, anyone able to help out?

iptables output:

iptables output

iptables NAT output:

iptables nat output

iptables rules


#!/bin/sh
iptables -F
sudo iptables -t nat -F
iptables -t nat -X
sudo iptables -t mangle -F
sudo iptables -t mangle -X
sudo iptables -t raw -F
sudo iptables -t raw -X
sudo iptables -t security -F
sudo iptables -t security -X
sudo iptables -F
sudo iptables -X
sudo iptables -P INPUT ACCEPT
sudo iptables -P FORWARD ACCEPT
sudo iptables -P OUTPUT ACCEPT

iptables -A INPUT -i lo -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 22 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
sudo iptables -A OUTPUT -p tcp --sport 22 -m conntrack --ctstate ESTABLISHED -j ACCEPT

iptables -A INPUT -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP
iptables -A FORWARD -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP
iptables -A OUTPUT -m set --match-set blacklist src -p udp --dport 30000 -m hashlimit --hashlimit 10/min --hashlimit-name ratelimithash -j DROP

iptables -t nat -A POSTROUTING -s 192.168.168.0/30 ! -o gre+ -j SNAT --to-source 20&&&&&&&&&&&&

iptables -A INPUT -s 192.168.168.2/32 -j ACCEPT

iptables -I INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT


iptables -A INPUT -p gre -j ACCEPT
iptables -A OUTPUT -p gre -j ACCEPT

iptables -t nat -A PREROUTING -d 20&&&&&&&&&&&& -p udp --dport 30000 -j DNAT --to-destination 192.168.168.2


iptables -A OUTPUT -j DROP
iptables -P INPUT DROP

已采纳解答

原帖链接 · Rushy · CC BY-SA 4.0

It seems this was the better rule - stops the traffic before going over the GRE tunnel over the limit

iptables -t mangle -A PREROUTING -p udp --dport 30000 -m set --match-set blacklist src -m hashlimit --hashlimit-mode srcip --hashlimit-srcmask 24 --hashlimit-above 100/sec --hashlimit-name test -j DROP

-hashlimit-srcmask 24 - to group the incoming traffic into /24 groups

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2021-08-29)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。