大网数据广告活动
Web服务器与PHP

Event ID 1072 or 1076 on state servers

· 52CE 我爱测

This article provides resolutions for the state server log Event ID 1072 or 1076.

This article helps you resolve the problem where log Events ID 1072 or 1076 on State servers.

Original product version:   Microsoft .NET Framework
Original KB number:   308097

Symptoms

One of the events below appears in the Application Event log of the state server computer when using the state server mode of Session state in ASP.NET. This happens when either the Web server or the computer running the state server is under high stress.

Event Type:Error
Event Source:ASP.NET 1.0.3306.0
Event Category:None
Event ID:1072
Date:9/12/2001
Time:4:00:25 PM
User:N/A
Computer: ComputerName
Description:
An error occurred in while processing a request in state server. Major callstack: EndOfRequest. Error code: 0x80072746

Note: The version of the .NET Framework that is mentioned in the previous event message is a pre-release version of the .NET Framework 1.0.

Event Type:Error
Event Source:ASP.NET 1.0.3306.0
Event Category:None
Event ID:1076
Date:9/12/2001
Time:4:02:05 PM
User:N/A
Computer: ComputerName
Description:
The state server has closed an expired TCP/IP connection. The IP address of the client is 127.0.0.1. The expired Read operation began at 09/12/2001 16:02:00.

Note: The version of the .NET Framework that is mentioned in the previous event message is a pre-release version of the .NET Framework 1.0.

Event Type: Error
Event Source: ASP.NET 1.1.4322.0
Event Category: None
Event ID: 1078
Date: 10/6/2005
Time: 11:03:47 AM
User: N/A
Computer: ComputerName
The state server has closed an expired TCP/IP connection. The IP address of the client is 127.0.0.1. The expired Read operation began at 10/06/2005 11:03:25.

Cause

When using the state server mode of Session state in ASP.NET, the ASP.NET Web server process in the Web server communicates with the state server by using WinSocket over Transmission Control Protocol/Internet Protocol (TCP/IP). By default, the Web server process sets the time-out value of all send and receive TCP/IP operations to 10 seconds. Similarly, the state server also times out all send and receive TCP/IP operations after 10 seconds.

However, if the Web server or the state server is under high CPU utilization (close to 100 percent), a TCP/IP operation can take more than 10 seconds and thus is canceled before completion. As a result, one of the above-mentioned events is logged, and the originating client request fails. The state server logs event ID 1072 if the ASP.NET Web server process times out a TCP/IP operation. If the state server times out a TCP/IP operation, the state server logs event ID 1076.

Resolution

To modify the TCP/IP operation time-out value for the ASP.NET Web server process, change the following attribute in the Machine.config file (or specify the following attribute in the Web.config file for any Web application).

 <sessionState
    stateNetworkTimeout="10"
 />

Here's how to modify the TCP/IP operation time-out value for the state server:

  1. Stop the ASP.NET state server service.
  2. Select Start, select Run, type Regedt32.exe, and then select OK to start Registry Editor.
  3. Locate the following key in the registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameter
  4. Add a DWORD value that is named SocketTimeout. Set a positive integer to represent the new TCP/IP timeout in seconds.
  5. Quit the Registry Editor.
  6. Restart the ASP.NET state server service.

For users who experience the problems that are mentioned in the Symptoms section, use these methods to increase the time-out values on the state server and on all Web servers to 20 seconds.

Note: If the state server isn't running when you increase the time-out values on the Web server, the client request times out after n seconds, where n equals a new timeout value, instead of the default 10 seconds.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
See source applicability · Source date 03/25/2020
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。