大网数据广告活动
数据库与应用安全

Warning about network binding order

· 52CE 我爱测

Provides a resolution for the problem that occurs when you install SQL Server 2008 in a failover cluster.

This article helps you resolve the problem that occurs when you install SQL Server 2008 in a failover cluster.

Original product version:   SQL Server
Original KB number:   955963

Symptoms

When you install Microsoft SQL Server 2008 in a failover cluster, you receive a warning message about the network binding order on the Setup Support Rules page.

Note: The warning is displayed even though the binding order is correct: IsDomainNetworkTopOfBindings.

Check to see if the computer domain server is on the network that's bound to the top of the network order.

The domain network isn't the first bound network. This will cause domain operations to run slowly and can cause timeouts that result in failures. Use the Windows network advanced configuration to change the binding order.

Cause

This issue may occur when you have a disabled network adapter or a ghosted network adapter on the computer.

Note: A network adapter that is enumerated in the Windows registry but that is hidden in Device Manager is called a ghosted network adapter. This issue may occur when you change a network connection's TCP/IP configuration from DHCP to a static IP. This issue may also occur when you have added and removed network adapters multiple times.

Resolution

To resolve this issue, remove disabled or ghosted network adapters. To do this, follow these steps:

  1. At a command prompt, type the following command lines:

    set devmgr_Show_Nonpresent_Devices=1
    start devmgmt.msc
    start ncpa.cpl
    

    [!NOTE] Make sure that you press ENTER after each line.

  2. In Device Manager, expand Network adapters.

  3. Compare the list of network adapters in Device Manager to the list of network adapters that are displayed in Network Connections. Network adapters that are present in Device Manager but not in Network Connections are ghosted network adapters.

  4. If there are any disabled network adapters, enable these adapters in Device Manager or in Network Connections.

  5. If there are any ghosted network adapters, remove them in Device Manager.

  6. Start the SQL Server setup.

  7. After setup is complete, open Network Connections, and then disable any network adapters that you don't want.

References

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
See source applicability · Source date 11/04/2020
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。