大网数据广告活动
启动与系统组件

Troubleshoot host status in Virtual Machine Manager

· 52CE 我爱测

Provides troubleshooting guidance for the Needs Attention, Not Responding, and Access Denied host status in Virtual Machine Manager.

This article discusses how to troubleshoot the Needs Attention, Not Responding, and Access Denied host status in System Center 2012 and later versions of Virtual Machine Manager. Any referenced articles also apply to System Center 2012 and later versions of Virtual Machine Manager.

Note: Home users: This article is only intended for technical support agents and IT professionals. If you're looking for help with a problem, ask the Microsoft Community.

Original product version:   System Center 2012 Virtual Machine Manager, Microsoft System Center 2012 R2 Virtual Machine Manager, System Center 2016 Virtual Machine Manager
Original KB number:   2742246

Summary

The Needs Attention, Not Responding, and Access Denied hosts in the VMM console occurs because the VMM Server is unable to communicate with the host machine or components (WMI, WinRM, and so on) on the host machine that are used to communicate with the VMM server are not functioning correctly.

The following are common errors that are logged in the Jobs views in the VMM console when the host status is Needs Attention, Not Responding, or Access Denied.

Error (2911)
Insufficient resources are available to complete this operation on the servername.contoso.com server. (Not enough storage is available to complete this operation (0x8007000E))

Error (2912)
An internal error has occurred trying to contact an agent on the servername.contoso.com server. (No more threads can be created in the system (0x800700A4))

Warning (2915)
The Windows Remote Management (WS-Management) service cannot process the request. The object was not found on the server (servername.contoso.com). Unknown error (0x80041002) or Unknown error (0x80338000)

Error (2916)
VMM is unable to complete the request. The connection to the agent servername.contoso.com was lost. Unknown error (0x80338126) or Unknown error (0x80338012)

Error (2927) A Hardware Management error has occurred trying to contact server servername.contoso.com. Unknown error (0x803381a6)

Warning (12710)
VMM does not have appropriate permissions to access the Windows Remote Management resources on the server (servername.contoso.com). Unknown error (0x80338104)

Warning (13926)
Host cluster servername.contoso.com was not fully refreshed because not all of the nodes could be contacted. Highly available storage and virtual network information reported for this cluster might be inaccurate.

Error (20506)
Virtual Machine Manager cannot complete the Windows Remote Management (WinRM) request on the computer servername.contoso.com.

Warning (13926)
Host cluster servername.contoso.com was not fully refreshed because not all of the nodes could be contacted. Highly available storage and virtual network information reported for this cluster might be inaccurate.

Error (406)
Access has been denied while contacting the computer servername.contoso.com.

Perform the following steps to identify the cause of the Needs Attention, Not Responding, or Access Denied host status.

Step 1: Check the health status of the host

To check the health status of a host, perform the following steps:

  1. Open the VMM console.
  2. Select the Fabric view, right-click the host that's experiencing issues and then choose Properties.
  3. Within the host properties, select Status.
  4. Select the category that has the red exclamation to view the error details.

For more information on the host health check feature, see Host Properties– New in VMM 2012 expanded host health checks.

Step 2: Verify the VMM service account is a member of the local administrator group on the host

  • If the VMM service is running under a domain account, verify the domain account is a member of the local administrator group on the host.
  • If the VMM is running under the local system account, verify the computer account is a member of the local administrator group on the host.

If the VMM service account is removed from the local administrator group on the host, this issue could be caused by a Restricted Groups Group Policy.

To resolve this issue, perform one of the following steps:

  • Add the VMM service account to the administrators' Restricted Groups Group Policy setting.
  • Create a new organizational unit (OU) in the domain, move the host computer object to the new OU and then configure the new organizational unit to block policy inheritance.

Step 3: Check for corrupted performance counters

Check the Application event log on the host to see if the following event is logged:

Log Name: Application
Source: Microsoft-Windows-LoadPerf
Event ID: 3012
Description:
The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the Data section.

If the event ID 3012 is logged on the host machine, perform the steps documented in How to manually rebuild Performance Counters for Windows Server 2008 64bit or Windows Server 2008 R2 systems to rebuild the performance counters.

Step 4: Check the Svchost.exe process of the Windows Remote Management service

VMM depends on the Windows Remote Management service for host communication. Therefore, the Not Responding status is likely to occur because of an error in the underlying Windows Remote Management communication between the VMM server and the host computer. In this scenario, the host status is OK shortly after you restart the host computer. However, the status changes to Not Responding after three to four hours, and jobs on the VMM server fail and return an error that resembles the following:

Error (2927)
A Hardware Management error has occurred trying to contact server servername.contoso.com. Unknown error (0x803381a6)

Additionally, if you stop the Windows Remote Management service at a command prompt, this process takes much longer than usual to be completed. Sometimes, it can take up to five minutes to stop.

This problem can occur if the shared Svchost.exe process that hosts the Windows Remote Management service is experiencing issues.

To resolve this problem, configure the Windows Remote Management service to run in a separate Svchost.exe process. To do this, open an elevated command prompt, type the following command and then press Enter.

sc config winrm type= own

Note: Make sure that you type the command exactly as it appears here. Notice the space after the equal sign (=) symbol.

If the command is completed successfully, you should see the following output:

[SC] ChangeServiceConfig SUCCESS

Step 5: Increase the default values for WinRM

As a best practice, run the following command lines on the VMM host and all the Hyper-V hosts that are being managed by VMM (and press Enter after each line).

Winrm quickconfig
winrm set winrm/config @{MaxTimeoutms="1800000"}
winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="1500"}
winrm set winrm/config/winrs @{MaxConcurrentUsers="100"}
winrm set winrm/config/winrs @{MaxProcessesPerShell="100"}
winrm set winrm/config/winrs @{MaxShellsPerUser="100"}
set-item "WSMan:\localhost\Plugin\WMI Provider\Quotas\MaxConcurrentOperationsPerUser" 400

You must restart WinRM (for the WINRM changes) and restart WMI (for the SC config setting), or reboot the server for the changes to take effect.

When you add untrusted hosts or perimeter/workgroup hosts, make sure that the LocalAccountTokenFilterPolicy registry value under the following registry subkey is set to 1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
See source applicability · Source date 04/09/2024
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。