大网数据广告活动
域与目录服务

W32Time doesn't start on a workgroup computer

· 52CE 我爱测

Describes an issue in which the Windows Time service doesn't automatically start in a stand-alone environment for Windows 7, Windows Server 2008 R2, and later versions of Windows. Workarounds are provided.

This article provides workarounds for an issue where the Windows Time service doesn't automatically start in a stand-alone environment.

Applies to:   Windows Server (All supported versions), Windows client (All supported versions)
Original KB number:   2385818

Symptoms

On a workgroup computer that's running Windows client or Windows Server, or a later version, the Windows Time service stops immediately after system startup. This issue occurs even after the Startup Type is changed from Manual to Automatic.

Cause

This issue occurs because the Windows Time service is configured as the Trigger-Start service, and it has been implemented as the default setting in Windows 7 and Windows Server 2008 R2.

Services and background processes have a significant effect on the performance of the system. The Trigger-Start service has been implemented in Windows 7 and Windows Service 2008 R2 to reduce the total number of auto-start services on the system. The goal is to improve the stability of the whole system, including improving performance and reducing power consumption. Under this implementation, the Service Control Manager has been enhanced to handle starting and stopping services by using specific system events.

For more information, see Service trigger events.

Whether the Windows Time service starts automatically depends on one of the following conditions:

  • Whether the computer is joined to an Active Directory Domain Services (AD DS) domain environment.
  • Whether the computer is configured as a workgroup computer.

The Windows Time service on domain-joined computers starts when a trigger event occurs. On workgroup computers that aren't joined to an AD DS domain:

  • The startup value for the Windows Time service is Manual.
  • The service status is Stopped.

You can check the Trigger-Start service settings by running the following command:

sc qtriggerinfo w32time  

Service Name: w32time

    Start Service
        DOMAIN JOINED STATUS: 1ce20aba-9851-4421-9430-1ddeb766e809 [DOMAIN JOINED]

    Stop Service
        DOMAIN JOINED STATUS: ddaf516e-58c2-4866-9574-c3b615d42ea1 [NOT DOMAIN JOINED]

Workaround

To start the Windows Time service at system startup, use any of the following methods.

  • Method 1

    Run the sc triggerinfo w32time delete command to delete the trigger event that's registered as the default setting and to change the Startup Type setting for the Windows Time service from Manual to Automatic:

  • Method 2

    Run the sc triggerinfo w32time start/networkon stop/networkoff command to define a trigger event that suits your environment. In this example, the command determines whether an IP address is given to a host. Then it starts or stops the service.

  • Method 3

    Change the Startup Type of the Windows Time service from Manual to Automatic (Delayed Start).

    [!NOTE] If the Startup Type of the Windows Time service is set to Automatic (Delayed Start), the Windows Time service may be started by the Time Synchronization before the Service Control Manager starts the Windows Time service task. It depends on the startup timing of the Windows operating system in question.

    In this situation, the service triggers an automatic stop after the success of the Time Synchronization task. If you use Method 3, you must disable the Time Synchronization to avoid the task to start the Windows Time service task. To do so, follow these steps:

    1. Start the Task Scheduler.
    2. Under Task Scheduler Library > Microsoft > Windows > Time Synchronization, select Synchronize Time.
    3. Right-click, and then select Disabled on the shortcut menu.

More information

The Windows Time service on a workgroup computer isn't started automatically at system startup by the Trigger-Start service. However, the Windows Time service is started by the Time Synchronization setting. The setting is registered on the Task Scheduler Library at 01:00 a.m. every Sunday for Time Synchronization. So the default setting can be kept as is.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。