This article provides a solution to an issue where backup fails when you try to create a system image.
Applies to: Windows 7 Service Pack 1
Original KB number: 2696906
Symptoms
Consider the following scenario:
- You are running Windows 7 Service Pack 1.
- In the Backup and Restore Control Panel applet, you click on the link to "Create a system image".
- The source volume that you are imaging is 2 terabytes in size or larger.
In this scenario, after the backup process has started, you may see an error similar to the following:
The backup failed.
Volumes larger than 2088958 megabyes cannot be protected. (0x807800B4)
The only option is to close the dialog box and exit out of the Create a system image wizard.
Cause
When creating a system image in Windows 7 Service Pack 1 by using the Create a system image wizard, a virtual hard disk (.vhd) is created and the system image is written to it. The current virtual hard disk specification limits the size of a virtual hard disk to be 2040 GB, which can fit a volume size of 2040 GB - 2 MB (that is, 2088958 MB). Due to this limitation, the source volume size must be 2,088,958 MB or less for the system image to be created.
Note: All of the above values are slightly under 2 TB in size (2 TB = 2048 GB = 2097152 MB).
Resolution
To work around this limit, shrink your volume size to 2,088,958 MB or less prior to creating the system image. More information on shrinking a basic volume can be found in the following article:
Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
