大网数据广告活动
启动与系统组件

Troubleshoot Windows Update Error Code 0x8007000e or 0x800705aa

· 52CE 我爱测

Discusses how to resolve Windows Update error code 0x8007000e or 0x800705aa.

This article discusses how to resolve Windows Update error code 0x8007000e or 0x800705aa.

Symptoms

When you try to install a Windows update, the installation fails. When this error occurs, you receive one of the following error messages:

Error - Installer encountered an error 0x8007000e. Not enough memory resources available to complete this operation.
An error occurred - Error : 0x800705aa

Insufficient system resources exist to complete the requested service. 

Note:
The second message typically occurs if you use dism /online /add-package /packagepath:<path of .cab file>to install the update.

When you review events in Event Viewer, you might also find Event ID 2004 recorded. The description of this event resembles the following example:

Windows successfully diagnosed a low virtual memory condition. The following programs consumed the most virtual memory: java.exe (1152) consumed 33821605888 bytes, java.exe (6316) consumed 5259997184 bytes, and java.exe (12536) consumed 1569894400 bytes.

Special case of error code 0x800705aa - Registry size limit

Error code 0x800705aa might indicate a registry issue instead of a general virtual memory issue. To determine the source of the issue, check the CBS.log file for entries that resemble the following example:

2024-05-13 22:31:56, Info                  CBS    Failed to load the COMPONENTS hive from 'C:\Windows\System32\config\COMPONENTS' into registry key 'HKLM\COMPONENTS'. [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to load component store [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to get CSI store. [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to get CSI Inventory [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to get component state. [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to get current state of the deployment [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
2024-05-13 22:31:56, Info                  CBS    Failed to get Transaction State for package: Microsoft-Windows-NetFx4-OC-Package~31bf3856ad364e35~amd64~~10.0.17763.1, update: NetFx4 [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]

For a contrasting example of CBS log entries that indicate a nonregistry cause, see More information.

For more information about how to use the CBS log, see Windows Update log files.

Cause

In most cases, this issue occurs if the computer or virtual machine (VM) doesn't have enough available virtual memory for Windows to install the update. The most common causes of this issue are the following conditions:

  • Third-party applications are consuming lots of virtual memory.
  • The computer's virtual memory isn't managed automatically. Instead, it's manually configured.

If the CBS log indicates that the issue involved registry resources, the RegistrySizeLimit registry entry is set to a value other than 0. This value restricts the registry's maximum size. When the registry size grows to meet the configured limit, Windows can't perform necessary servicing activities, such as updates.

Workaround: Clean restart

When you start Windows by using a normal startup, several applications and services start automatically, and then they run in the background. These programs include basic system processes, antivirus software, and system utility applications. These applications and services can interfere with the update process.

A clean restart, also known as a clean boot, starts Windows without these background applications and services. Follow these steps:

  1. Sign in to the affected computer as an administrator.
  2. In the Search box, enter msconfig, and then select System Configuration.
  3. In System Configuration, select Services > Hide all Microsoft services > Disable all.
  4. Select Startup > Open Task Manager.
  5. Under Startup in Task Manager, select each startup item, and then select Disable.
  6. Close Task Manager.
  7. In System Configuration, select Startup > OK.
  8. Restart the computer.

After the computer restarts, try again to update it.

Resolution

Important:
Before you troubleshoot this issue, back up the operating system disk. For information about this process for VMs, see About Azure Virtual Machine restore.

General resource issues

Note:
If the affected computer is a VM, consider upgrading the virtual hardware of the VM to increase its available memory resources.

To configure the computer to automatically manage its virtual memory, follow these steps:

  1. Open System Properties: Select Search, and enter sysdm.cpl.
  2. In System Properties, select Advanced > Performance > Settings.
  3. In Performance Options, select Advanced > Virtual memory > Change.
  4. Make sure that Automatically manage paging file size for all drives is selected, and then select OK.
  5. Restart the computer.
  6. To make sure that this issue doesn't occur again, monitor the computer's available memory resources.

Registry size limit issue

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For protection, back up the registry before you modify it so that you can restore it if a problem occurs. For more information about how to back up and restore the registry, see How to back up and restore the registry in Windows.

To reset the registry size limit, follow these steps:

  1. In the search bar of the affected computer or VM, type regedit, and then right-click Registry Editor in the search results.

  2. Select Run as administrator.

  3. Select HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.

  4. Right-click RegistrySizeLimit, and then do one of the following actions:

    • Select Delete.
    • Select Modify, enter 0 in the Value data field, and then select OK.
  5. Restart the physical computer or VM.

  6. On the affected computer or VM, try again to update Windows.

If the issue persists, contact Microsoft Support for more assistance. Attach copies of any relevant CBS.log data to your support request.

More information

The following example shows how error code 0x800705aa might appear in the CBS.log file if the issue doesn't involve the registry size limit:

2024-02-06 02:20:51, Info          
       DPX    Ended DPX phase: Apply Deltas
Provided In File
2024-02-06 02:20:51, Info          
       DPX    Started DPX phase: Apply Deltas
Provided In File
2024-02-06 02:23:42, Info          
       DPX    DpxException hr=0x800705aa code=0x02060e
2024-02-06 02:23:42, Info          
       DPX    DpxException hr=0x800705aa
code=0x02060e
2024-02-06 02:23:42, Info          
       DPX    DpxException hr=0x800705aa
code=0x02060e
2024-02-06 02:23:42, Info          
       DPX    Failed to create file [file://%3f/C:/windows/SoftwareDistribution/Download/90fbe639b26d2696e96c2f268353e77c/inst/_windows10.0-kb5034127-x64.cab_/$dpx$.tmp/f8d13c2b8403f04db9eddfe6c7ae2060.tmp]\\?\C:\windows\SoftwareDistribution\Download\90fbe639b26d2696e96c2f268353e77c\inst\_windows10.0-kb5034127-x64.cab_\$dpx$.tmp\f8d13c2b8403f04db9eddfe6c7ae2060.tmp
2024-02-06 02:23:42, Info          
       DPX    ProvideRequestedDataByFile: [file://%3f/C:/windows/SoftwareDistribution/Download/90fbe639b26d2696e96c2f268353e77c/inst/_windows10.0-kb5034127-x64.cab_/Cab_2_for_KB5034127_PSFX.cab]\\?\C:\windows\SoftwareDistribution\Download\90fbe639b26d2696e96c2f268353e77c\inst\_windows10.0-kb5034127-x64.cab_\Cab_2_for_KB5034127_PSFX.cab
failed, Response file Name: ExtractFromCabInFile
2024-02-06 02:23:42, Info          
       DPX    Ended DPX phase: Apply Deltas
Provided In File
2024-02-06 02:23:42, Info          
       DPX    DpxException hr=0x800705aa
code=0x020201
2024-02-06 02:23:42, Info          
       DPX    Ended DPX phase: Resume and
Download Job
2024-02-06 02:23:42, Info          
       DPX    DpxException hr=0x800705aa
code=0x020217

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
See source applicability · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。