大网数据广告活动
启动与系统组件

Troubleshoot Windows Update error 0x80070008

· 52CE 我爱测

Describes how to resolve Windows Update error 0x80070008 (ERROR_NOT_ENOUGH_MEMORY). This error indicates that the computer doesn't have enough memory to complete the update installation.

Summary

Windows Update error 0x80070008 (ERROR_NOT_ENOUGH_MEMORY) occurs when the computer doesn't have enough available memory (RAM) to install an update. This error commonly occurs on virtual machines (VMs) that have limited RAM, or when other processes consume most of the available memory during the update process. This article describes how to identify the cause of the error. The article walks you through several steps to resolve the error, including freeing up memory, adjusting virtual memory settings, and resizing Azure VMs.

Symptoms

You install a Windows update, but the installation fails, and you see error code 0x80070008 reported.

To get more information, review the following resources:

  1. Review the WindowsUpdate.log file or the CBS.log file. Look for entries that resemble the following example:

    Error 0x80070008: Not enough memory resources are available to process this command.
    
  2. Open Event Viewer, and go to Windows Logs > System. Look for events from the Resource-Exhaustion-Detector source that occurred around the time of the update failure.

  3. Check for low memory conditions. Use one of the following methods:

    • Open Task Manager, select Performance, and then select Memory.

    • Open a Windows PowerShell command prompt, and then run the following cmdlets:

      Get-Process | Sort-Object WorkingSet64 -Descending | Select-Object -First 10 Name, @{N='MB';E={[math]::Round($_.WorkingSet64/1MB)}}
      

Cause

This error occurs when the computer doesn't have enough available memory (RAM) to install the update. Common causes include:

  • The computer is a VM that has a small memory allocation (for example, 1 GB or less).
  • During the update, other applications or services consume most of the available memory.
  • The computer can't allocate contiguous memory blocks of sufficient size because of memory fragmentation.

This issue is more likely to occur if the update package is large. Such updates might require more memory than what's available for extraction and staging.

Resolution

Important:
Before you troubleshoot this issue, back up the operating system disk. For information about this process for VMs, see About Azure Virtual Machine restore.

Step 1: Free up memory

  1. Before you install updates, stop all unnecessary services and applications.

  2. After you stop services and applications, restart the Windows Update service. For example, open a Command Prompt window, and then run the following commands:

    net stop wuauserv
    net start wuauserv
    
  3. Try again to install the update. If the update still doesn't install, go to step 2 (for virtual machines) or step 3 (for all computers).

Step 2: Increase VM memory (Azure)

If the affected computer is an Azure VM, resize the VM by following these steps:

  1. In the Azure portal, go to the VM resource.
  2. Under Availability + scale, select Size.
  3. Select a VM size that uses more RAM. To make sure that updates install smoothly, select a size that uses at least 2 GB of RAM.
  4. Select Resize.
  5. Try again to install the update. If it still doesn't install, continue to step 3.

For more information, see Resize a virtual machine.

Step 3: Configure virtual memory

If increasing physical memory isn't possible, increase the page file size. This setting allows the computer to use larger sections of the hard disk for memory. Follow these steps:

  1. On the affected computer, open Settings, and select System.
  2. Under Related links, select Advanced system settings.
  3. On the Advanced tab of the System Properties dialog box, locate the Performance section, and then select Settings.
  4. Select Advanced, locate the Virtual memory section, and then select Change.
  5. If the Automatically manage paging file size for all drives checkbox is selected, clear it.
  6. Select Custom size, and then type new values for the initial and maximum paging file size. The new values should be greater than 1.5 times the physical RAM capacity.
  7. Restart the computer.
  8. Try again to install the update. If it still doesn't install, continue to step 4 (for virtual machines) or step 5 (for all computers).

Step 4: Use the Run command reset tool (Azure)

If the previous steps don't resolve the issue on an Azure VM, try the Azure VM Windows Update Reset Tool. You can run the tool directly from the VM's Azure portal page by using Operations > Run command. When you use this method, you don't have to sign in to the VM.

This tool resets the Windows Update servicing stack. The reset can clear memory-related lock states in the update agent.

After you run the tool, try again to install the update. If it still doesn't install, go to step 5.

Step 5: Install updates individually

If the issue persists, install updates one at a time instead of in batches.

To get a list of the pending updates, run the following cmdlet at a PowerShell command prompt on the affected computer:

Get-WindowsUpdate -MicrosoftUpdate

To install one of the updates from the list, run the following cmdlet:

Install-WindowsUpdate -KBArticleID "KB5XXXXXX" -AcceptAll

Note:
In this cmdlet, XXXXXX represents the identification number of the update.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- ✅ Supported versions of Azure Virtual Machine - ✅ Supported versions of Windows Client - ✅ Supported versions of Windows Server · Source date 04/28/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。