大网数据广告活动
网络与域名解析

10060 Connection timed out error with proxy server or ISA Server on slow link

· 52CE 我爱测

Describes the 10060 Connection timed out error with proxy server or ISA Server on slow link.

This article provides help to fix Winsock timeout errors that occur on slow, congested, or high latency Internet links with Microsoft Proxy Server or ISA Server.

Applies to:   Windows 10 - all editions
Original KB number:   191143

Symptoms

Winsock timeout errors may occur on slow, congested, or high latency Internet links with Microsoft Proxy Server or ISA Server. The following Winsock error Message appears on the client Web browser:

Proxy Reports:
10060 Connection timed out

The Web server specified in your URL could not be contacted. Please check your URL or try your request again.

Note: A timeout error may also occur when connecting to an Internet server that does not exist or if there is more than one default gateway on the Proxy Server computer.

Resolution

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see How to back up and restore the registry in Windows.

Adjusting the following TCP/IP setting by adding a subkey in the registry should reduce the number of timeouts by allowing more time for the connection to complete. This setting is not present in the registry by default.

  1. Start Registry Editor (Regedt32.exe) and go to the following subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

  2. On the Edit menu, click Add Value, and then add the following information:

    • Value name: TcpMaxDataRetransmissions
    • Value type: REG_DWORD - Number
    • Valid range: 0 - 0xFFFFFFFF
    • Default value: 5 Decimal
    • New value: 10 Decimal
  3. Click OK, and then quit Registry Editor.

  4. Reboot after registry change has been made.

More information

The TcpMaxDataRetransmissions parameter controls the number of times TCP retransmits an individual data segment (non-connect segment) before ending the connection. The retransmission timeout is doubled with each successive retransmission on a connection. It is reset when responses resume. The base timeout value is dynamically determined by the measured round-trip time on the connection.

The default value for this registry entry is 5; double this value to 10 (Decimal) (see step 2 above). If connection timeouts still occur, try doubling the value again to 20 (Decimal).

Note: This registry entry may only reduce the number of connection timeout errors that occur. Changes to your Internet connection or router may have to be made to completely resolve the problem.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。