大网数据广告活动
网络与域名解析

The PPP link control protocol was terminated error when you establish a dial-up connection

· 52CE 我爱测

Describes an issue where you can't establish a dial-up connection.

This article helps fix an issue where Error 734: The PPP link control protocol was terminated occurs when you try to establish a dial-up connection.

Applies to:   Windows 2000
Original KB number:   318718

Symptoms

If you try to establish a Point-to-Point Protocol (PPP) dial-up connection, you may receive the following error message:

Error 734: The PPP link control protocol was terminated.

As a result, you can't establish a dial-up connection.

Cause

This issue may occur if either of the following conditions are true:

  • Multi-link negotiation is turned on for the single-link connection.

  • The dial-up connection security configuration is incorrectly configured to use the Require secured password setting.

Resolution

To resolve this issue:

  1. Click Start, point to Settings, and then click Network and Dial-up Connections.

    [!NOTE] For Windows Server 2003, click Start, point to Control Panel, and then point to Network Connections.

  2. Right-click the appropriate dial-up networking connection, and then click Properties.

  3. Click the Networking tab, and then click Settings.

  4. Click to clear the Negotiate multi-link for single link connections check box (if it's selected).

  5. Click OK > OK.

  6. Double-click the connection, and then click Dial.

    • If this procedure resolves the issue and you can establish a dial-up connection, you don't have to follow the remaining steps in this article.
    • If this doesn't resolve the issue and you can't establish a dial-up connection, go to step 7 to continue to troubleshoot this issue.
  7. Right-click the connection, and then click Properties.

  8. Click the Security tab.

  9. Under Security options, click Allow unsecured password in the Validate my identity as follows box, and then click OK.

  10. Double-click the connection, and then click Dial to verify that you can establish a dial-up connection.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。