大网数据广告活动
网络与域名解析

Can't install the SNMP and WMI SNMP Provider features

· 52CE 我爱测

Works around the issue in which the SNMP and WMI SNMP Provider features can't be installed using the DISM.exe tool in Windows 10 or Windows 11.

This article provides workarounds to add the Simple Network Management Protocol (SNMP) and Windows Management Instrumentation (WMI) SNMP Provider features in Windows 10 or Windows 11.

Error when adding the SNMP and WMI SNMP Provider features

You try to add the SNMP and WMI SNMP Provider features in Windows 10 or Windows 11 by using the Deployment Image Servicing and Management (DISM.exe) tool as follows:

dism /online /enable-feature /featureName:SNMP /featureName:WMISnmpProvider

Then, you receive this error message:

Error: 0x800f080c
Feature name SNMP is unknown.
Feature name WMISnmpProvider is unknown.
A Windows feature name was not recognized.
Use the /Get-Features option to find the name of the feature in the image and try the command again.

Important: This issue occurs because the SNMP and WMI SNMP Provider features are deprecated.

To work around this issue, use one of the following methods.

Add the SNMP and WMI SNMP Provider features from the Settings page

  1. Go to Start, select Settings > System.

    [!NOTE] In versions older than Windows 10, version 22H2, go to Settings > Apps > Apps & features instead.

  2. Select Optional features > Add a feature.

    • To add the SNMP feature, select Simple Network Management Protocol (SNMP) > Add.
    • To add the WMI SNMP Provider feature, select WMI SNMP Provider > Add.

To verify the added state, select See optional features history.

Add the SNMP and WMI SNMP Provider features by using Windows PowerShell

  1. Start Windows PowerShell as an administrator.

  2. Run the following Add-WindowsCapability cmdlets to add the SNMP and WMI SNMP Provider features.

    Add-WindowsCapability -Online -Name "SNMP.Client~~~~0.0.1.0"
    
    Add-WindowsCapability -Online -Name "WMI-SNMP-Provider.Client~~~~0.0.1.0"
    

To verify the added state, run the following Get-WindowsCapability cmdlets.

Get-WindowsCapability -Online -Name "SNMP.Client~~~~0.0.1.0"
Get-WindowsCapability -Online -Name "WMI-SNMP-Provider.Client~~~~0.0.1.0"

The state is Installed if these features are added correctly.

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for User Experience issues.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。