大网数据广告活动
性能与资源

Fail to use PXE to boot clients from WDS

· 52CE 我爱测

Provides a solution to fix an error that occurs when you use PXE to boot a client computer from a Windows Deployment Services (WDS) server.

This article provides help to fix an error that occurs when you use PXE to boot a client computer from a Windows Deployment Services (WDS) server.

Applies to:   Windows 10 - all editions
Original KB number:   2602043

Symptoms

When using PXE to boot a client computer from a WDS server, you may encounter one of the following symptoms or error messages

  • Invalid boot file received
  • PXE client hangs. At the point of the error you are executing code from the PXE bios, so the actual error message can vary.

Cause

This can occur with the following scenario:

  • You are using DHCP scope option 67 to direct PXE clients to download specific Boot Program using BootFileName.

  • You have a mix of BIOS-based machines and UEFI machines and you attempt to boot the incorrect type of Boot Program

Resolution

If you have a mix of UEFI and Legacy BIOS machines, you cannot use DHCP Scope Options to direct PXE clients to the Boot Program on the WDS server. You must use IP Helper Table Entries. For more information on configuring IP helper table entries, contact your router/switch manufacturer.

More information

For more information about the WDS Boot Program's for UEFI computers wdsmgfw.efi, see Managing Network Boot Programs.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。