大网数据广告活动
远程桌面与会话

Some USB devices aren't available

· 52CE 我爱测

This article describes why specific USB devices may not be available for RemoteFX USB redirection, and how to make them available.

This article describes why specific USB devices aren't available for RemoteFX USB redirection, and how to make them available.

Applies to:   Windows 7 Service Pack 1
Original KB number:   2653326

Symptoms

On a system where RemoteFX USB redirection is enabled, devices of the following types may not be listed in Remote Desktop Connection under the Other Supported RemoteFX USB devices category:

  • Printer
  • Audio Recording/Playback
  • Mass Storage Device (examples include hard drives, CD/DVD-RW drives, flash drives, and memory card readers)
  • Smart Card Reader
  • PTP Camera
  • MTP Media Player
  • Apple iPod/iPod Touch/iPhone/iPad
  • Blackberry PDA
  • Windows Mobile PDA
  • Network Adapter

Additionally, composite devices that contain a device interface that corresponds to any of these device types also may not be listed in Remote Desktop Connection under the Other Supported RemoteFX USB devices category.

Cause

By default, devices in the categories that are mentioned in the "Symptoms" section are accessible in the remote session by using high-level device redirection methods. These methods of redirection enable optimal performance and backward compatibility of the device in the majority of user scenarios. Therefore, these devices are not offered through RemoteFX USB redirection.

Resolution

An override mechanism is provided to selectively enable the use of specific device types in the categories that are mentioned in the "Symptoms" section through RemoteFX USB redirection. Device types that are enabled by this mechanism will be made available for RemoteFX USB redirection and will appear in Remote Desktop Connection under the Other Supported RemoteFX USB devices category. In order to use the device through RemoteFX USB redirection, the device must be selected for remote access by using the Remote Desktop Connection UI, the "usbdevicestoredirect:s: RDP file string, or another method.

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows
To enable a device type for RemoteFX USB redirection, follow these steps:

  1. Delete all instances of USB storage devices from the client.

  2. Make sure that USB storage devices can't be installed on the client through Group Policy.

  3. Identify the appropriate interface class GUID for the device type that you want to make available. Examples are as follows:

    Device type Interface class GUID
    Hard Drive {53F5630 7 -B6BF-11D0-94F2-00A0C91EFB8B}
    CD-ROM {53F5630 8 -B6BF-11D0-94F2-00A0C91EFB8B}

    For a complete listing of all system-defined device interface classes, please go to the following Microsoft Developer Network website: System-Defined Device Interface Classes

    [!NOTE] For a device that has multiple interface class GUIDs that are to be made available through this mechanism, only one corresponding interface class GUID has to be added to the registry.

    [!IMPORTANT] The addition of the following GUIDs is not supported:

    • GUID_CLASS_USB_DEVICE
    • GUID_CLASS_USB_HOST_CONTROLLER
    • GUID_CLASS_USBHUB
    • GUID_DEVINTERFACE_USB_DEVICE
    • GUID_DEVINTERFACE_USB_HOST_CONTROLLER
    • GUID_DEVINTERFACE_USB_HUB
  4. Locate the following key in the registry of the client computer (that is, the computer that is using the Remote Desktop Connection application to connect to another computer):

    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\Client\UsbSelectDeviceByInterfaces
    Under this key, use the following format to add a value for each device interface class GUID that you wish to make available:

    Type: REG_SZ (String) Name: Any unique string Data: The interface class GUID, in the following format: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}, where each x represents a hexadecimal digit, case insensitive. Example To enable RemoteFX USB redirection of CD-ROM drives, add the following value:

    Type: REG_SZ Name: 100 Data: {53F56308-B6BF-11D0-94F2-00A0C91EFB8B}

    Or run the following command from an Administrator command prompt:

    reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\Client\UsbSelectDeviceByInterfaces" /v 100 /t REG_SZ /d {53f56308-b6bf-11d0-94f2-00a0c91efb8b} /f

  5. Restart Remote Desktop Connection if it is currently running.

More information

For step-by-step instructions on configuring an evaluation deployment of RemoteFX USB redirection for Windows 7 SP1, go to the following Microsoft Technet website:
Configuring USB Device Redirection with Microsoft RemoteFX Step-by-Step Guide

For more information about RemoteFX USB redirection, review the following article on the Remote Desktop Services Blog:
Introducing Microsoft RemoteFX USB Redirection: Part 3

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。