大网数据广告活动
启动与系统组件

Fail to attach PCI Express expansion chassis

· 52CE 我爱测

Provides workarounds for errors that occur when you attach a PCI Express expansion chassis to a computer.

This article provides workarounds for errors that occur when you attach a PCI Express expansion chassis to a computer.

Original KB number:   942959

Important: This article contains information about how to modify the registry. Make sure that you back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

Symptoms

Consider the following scenario:

  • A PCI Express expansion chassis is connected to a computer.
  • There are devices connected to the PCI Express expansion chassis.

In this scenario, the devices may not be enumerated correctly, or they may not start correctly. Additionally, you may receive one of the following error messages when you view the device properties in Device Manager:

  • Error 1:

    This device cannot find enough free resources that it can use. (Code 12)

  • Error 2:

    The device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Cause

Cause of error 1

This issue may occur because of the initial state of the PCI Express bridge device in the expansion chassis. By default, when you start or reset PCI Express bridge devices, the initial values of the limit register for the bridge resource window are less than the initial values of the base register for the bridge resource window. This behavior is interpreted as an indication that the bridge resource window is disabled. Additionally, no bridge resource window requirements for the PCI Express bridge device are generated. Therefore, any PCI Express bridge device that requires resources from the bridge resource window will fail enumeration. In this situation, a Code 12 error is generated.

Cause of error 2

This issue may occur if the operating system runs out of Peripheral Component Interconnect (PCI) bus numbers. Typically, the computer BIOS configures a limited bus-number range for PCI Express bridge devices. When an expansion chassis that contains a PCI Express complex switch together with a deep device hierarchy is added to the computer, the operating system runs out of available bus numbers. Therefore, the system cannot start devices in the expansion chassis.

Workaround

Workaround for error 1

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. To work around this issue, follow these steps:

  1. Click Start, type regedit in the Start Search box, and then click regedit in the Programs list.

    If you are prompted for an administrator password or for confirmation, type the password, or click Continue.

  2. Locate the following registry subkey, and then click it:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PnP\Pci

  3. If the HackFlags registry entry is not present, follow these steps:

    1. On the Edit menu, point to New, and then click DWORD (32-bit) Value.
    2. Type HackFlags, and then press ENTER.
    3. On the Edit menu, click Modify.
    4. In the Value data box, type 400, click Hexadecimal in the Base area, and then click OK.
    5. Exit Registry Editor.
  4. If the HackFlags registry entry is present, follow these steps:

    1. Right-click HackFlags, and then click Modify.
    2. In the Value data box, type 400, click Hexadecimal in the Base area, and then click OK.
    3. Exit Registry Editor.

Workaround for error 2

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. To work around this issue, follow these steps:

  1. Click Start, type regedit in the Start Search box, and then click regedit in the Programs list.

    If you are prompted for an administrator password or for confirmation, type the password, or click Continue.

  2. Locate the following registry subkey, and then click it:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PnP\Pci

  3. If the HackFlags registry entry is not present, follow these steps:

    1. On the Edit menu, point to New, and then click DWORD (32-bit) Value.
    2. Type HackFlags, and then press ENTER.
    3. On the Edit menu, click Modify.
    4. In the Value data box, type 200, click Hexadecimal in the Base area, and then click OK.
    5. Exit Registry Editor.
  4. If the HackFlags registry entry is present, follow these steps:

    1. Right-click HackFlags, and then click Modify.
    2. In the Value data box, type 200, click Hexadecimal in the Base area, and then click OK.
    3. Exit Registry Editor.

Enable the workarounds for error 1 and error 2 at the same time

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  1. Click Start, type regedit in the Start Search box, and then click regedit in the Programs list.

    If you are prompted for an administrator password or for confirmation, type the password, or click Continue.

  2. Locate the following registry subkey, and then click it:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PnP\Pci

  3. If the HackFlags registry entry is not present, follow these steps:

    1. On the Edit menu, point to New, and then click DWORD (32-bit) Value.
    2. Type HackFlags, and then press ENTER.
    3. On the Edit menu, click Modify.
    4. In the Value data box, type 600, click Hexadecimal in the Base area, and then click OK.
    5. Exit Registry Editor.
  4. If the HackFlags registry entry is present, follow these steps:

    1. Right-click HackFlags, and then click Modify.
    2. In the Value data box, type 600, click Hexadecimal in the Base area, and then click OK.
    3. Exit Registry Editor.

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for deployment-related issues.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。