大网数据广告活动
启动与系统组件

Error when creating a single partition

· 52CE 我爱测

Provides a solution to an error that occurs when you install Windows to a drive greater than 2.2 TB.

This article provides a solution to an error that occurs when you install Windows to a drive greater than 2.2 TB.

Applies to:   Windows 7 Service Pack 1
Original KB number:   2604034

Symptoms

When installing Windows to a drive greater than 2.2TB, you receive Error 0x80042468. This will occur if you install Windows 7 and manually try to create one partition using "Advanced Drive Options" during setup.

Cause

It's by design with Windows 7 x86 and with Windows 7 x64 on a non-UEFI system.

Note: The check for UEFI (Unified Extensible Firmware Interface) and GUID Partition Table (GPT) isn't done during Setup in Advanced Format like it's done in Disk Management.

Resolution

Install will complete but you won't be able to access the drive beyond 2.2 TB.

If you install Windows 7 x64 on a system that supports UEFI, you can partition the drive to use GUID Partition Table (GPT) and access all of the drive if the system is in UEFI mode.

Important: The disk that you select can't contain any data. Back up the data, or move your data to another volume before doing operations in diskpart.

To Boot a UEFI enabled system, the disk type should be changed to GPT using convert gpt command. Follow steps as below.

  1. Press Shift+F10, which brings a command window. At command prompt, run the Diskpart.exe (It starts the diskpart console. After the console is initialized, DISKPART> is displayed. The diskpart console is now ready for input commands.)

  2. Under diskpart> prompt type "list disk". (Locate the disk, in this case disk 0)

  3. Type Select disk 0 (It selects the disk that you want to convert to GPT.)

  4. Type Convert GPT (This command will convert drive to GPT.)

    :::image type="content" source="media/error-when-creating-single-partition/type-convert-gpt-command.png" alt-text="Screenshot of the output of convert gpt command." border="false":::

  5. Just to make sure everything went fine type list disk. The converted disk should now have an asterix in the GPT column. (See example image below)

    :::image type="content" source="media/error-when-creating-single-partition/type-list-disk.png" alt-text="Screenshot of the output of list disk command." border="false":::

  6. Type exit and exit again. It should close the command window.

Select the disk you have converted and that should display as Unallocated Space.

The installation process should start and continue as usual. After reboot, the Windows 7 x64 should be installed on the GPT partitioned disk.

More information

Windows doesn't support booting of GPT initialized volumes with UEFI systems on 32-bit versions of Windows, and that legacy BIOS (Basic Input/Output System) systems don't support booting of GPT partitioned volumes. Consult with your system vendor to determine if the system supports UEFI and booting of devices greater than 2 TB.

For details on Windows support for large drives, see the following articles:

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for deployment-related issues.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。