This article explains why Kernel-PnP event ID 219 might be logged together with User-Mode Driver Framework (UMDF) event ID 10118 during Windows startup and when these events can be safely ignored.
Original KB number: 974720
Symptoms
During Windows startup, when Windows tries to start a device that uses a UMDF driver, the following Kernel-PnP warning event might be logged in the System log:
Warning xxxx/xx/xx xx:xx:xx Kernel-PnP 219 (212)
The driver \Driver\WudfRd failed to load for the device xxxx.
This warning might be accompanied by the following DriverFrameworks-UserMode informational event:
Information xxxx/xx/xx xx:xx:xx DriverFrameworks-UserMode 10118 Startup of the UMDF reflector
UMDF reflector is unable to connect to service control manager (SCM). This is expected during boot, when SCM has not started yet. Will retry when it starts.
Cause
The UMDF reflector is the kernel-mode component that enables a device to use a UMDF driver. During Windows startup, the reflector might try to connect to the Service Control Manager (SCM) before SCM has started.
In this situation, the reflector logs informational event ID 10118 to indicate that the connection isn't yet available and will be retried when SCM starts. Kernel-PnP event ID 219 might also be logged because the device couldn't be started at that time.
Resolution
For this startup timing condition, no action is required. The UMDF reflector retries the connection when SCM starts, allowing Windows to retry starting the device.
If the events occur only during startup and the device subsequently starts and works correctly, you can safely ignore them.
You can confirm the driver is loaded successfully in the System Information, and you can confirm the devices are running correctly in the Device Manager.
If the events continue after startup or the device doesn't work correctly, investigate the device or driver issue. Don't assume that every Kernel-PnP event ID 219 is caused by this startup timing condition.
Data collection
If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for deployment-related issues.
Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
