大网数据广告活动
启动与系统组件

Microsoft Store doesn't open after a domain-joined computer makes a VPN connection

· 52CE 我爱测

Discusses an issue in which Microsoft Store doesn't open after a domain-joined computer connects to a VPN connection. The VPN connection has force tunneling enabled.

This article discusses an issue in which you can't open Microsoft Store after a domain-joined computer connects to a VPN connection that has force tunneling enabled.

Applies to:   Windows 10 – all editions
Original KB number:   4537233

Symptoms

Assume that you connect a domain-joined Windows 10 computer to a VPN connection that has force tunneling enabled. When you try to open Microsoft Store, it doesn't open, and you receive a "This page failed to load" error message.

If you do one of the following operations, Microsoft Store opens as expected:

  • Disconnect the computer from the domain, and then connect to the VPN connection.
  • Connect the computer to a VPN connection that has force tunneling disabled.
  • Turn off the Windows Defender Firewall service, and then connect the computer to the VPN connection.

Cause

The Microsoft Store app uses a security model that depends on network isolation. Specific network capabilities and boundaries must be enabled for the store app, and network access must be allowed for the app.

When the Windows Firewall profile isn't Public, a default block rule blocks all outgoing traffic that has the remote IP set as 0.0.0.0. While the computer is connected to a VPN connection that has force tunneling enabled, the default gateway IP is set as 0.0.0.0. If the network access boundaries aren't set appropriately, the following behaviors occur:

  • The default block firewall rule is applied.
  • Microsoft Store app traffic is blocked.

Resolution

To fix this issue, follow these steps to create a Group Policy object (GPO):

  1. Open the Group Policy Management snap-in (gpmc.msc), and create, or open a Group Policy for editing.

  2. From the Group Policy Management Editor, expand Computer Configuration > Policies > Administrative Templates > Network, and then select Network Isolation.

  3. In the right pane, double-click Private network ranges for apps.

  4. In the Private network ranges for apps dialog box, select Enabled.

  5. In the Private subnets text box, type the IP range of your VPN adapter, and then select OK.

    For example, If your VPN adapter IPs are in the 172.x.x.x range, add 172.0.0.0/8 in the text box.

  6. Double-click Subnet definitions are authoritative, select Enabled, and then select OK.

  7. Restart the client to make sure that the GPO takes effect.

After the Group Policy is applied, the added IP range is the only private network range that's available for network isolation. Windows will now create a firewall rule that allows the traffic, and will override the previous outbound block rule with the new rule.

Note:

  • When your VPN address pool range changes, you should change this GPO accordingly. Otherwise, the issue will recur.
  • You can push the same GPOs from the DC to multiple computers.
  • On the individual computers, you can check the following registry location to make sure that the GPO takes effect:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\NetworkIsolation

More information

You can use the "checknetisolation" built-in tool to check the network capabilities. When the computer is connected to the domain profile and VPN force tunneling, the InternetClient and InternetClientServer capabilities aren't active. For example:

C:\Windows\system32>checknetisolation Debug -n=microsoft.windowsstore_8wekyb3d8bbwe

Network Isolation Debug Session started.
Reproduce your scenario, then press Ctrl-C when done.
      Collecting Logs.....

Summary Report

Network Capabilities Status
----------------------------------------------------------------------
    InternetClient                Not Used and Insecure  
    InternetClientServer          Not Used and Insecure  
    PrivateNetworkClientServer    Missing, maybe intended  


Network Capabilities Status
----------------------------------------------------------------------
    InternetClient                Used and Declared
    InternetClientServer          Not Used and Insecure

Note: On the same client, if you remove the computer from the domain or disconnect the VPN, you can see that internetclient is being used.

For more information, see Isolating Windows Store Apps on Your Network.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。