大网数据广告活动
账户与安全

BitLocker could not be enabled when USB drive is not found

· 52CE 我爱测

Provides a resolution to an issue where BitLocker could not be enabled when USB drive is not found

This article provides a resolution to an issue where BitLocker could not be enabled when USB drive isn't found.

Applies to:   Windows Server 2012 R2, Windows 7 Service Pack 1
Original KB number:   2732377

Symptoms

When attempting to turn on BitLocker using a Startup Key as a protector and the system check option is accepted, BitLocker restarts the machine to complete the hardware test. If the USB drive holding the Startup Key is removed, or if USB ports are not enumerated correctly by the BIOS, then BitLocker isn't enabled on the volume and you may see following error message:

BitLocker could not be enabled. The BitLocker encryption key cannot be obtained. Verify that the Trusted Platform Module (TPM) is enabled and ownership has been taken. If this computer does not have a TPM, verify that the USB drive is inserted and available. C: was not encrypted.

Cause

Boot Manager (Bootmgr) verifies that, the key material needed to unlock the disk is available before booting and starting encryption. If it is not available during the pre-boot hardware test before encryption, BitLocker will refuse to encrypt rather than leave the disk in a state that may not be usable in the expected manner. In the Startup Key case, this can occur when Bootmgr fails to find the Startup Key, either because then USB flash drive containing the Startup Key wasn't plugged in, or because the BIOS did not correctly enumerate the USB port with the USB drive inserted.

Resolution

The resolution will depend on the underlying cause. If you have already verified that the USB flash drive containing the Startup Key is inserted correctly and securely in the USB port, try the following steps:

  1. Some USB ports are not enumerated during boot. Try a different USB port.
  2. Some USB drives cannot be read during boot. Try a different USB dongle.
  3. Boot into the BIOS and ensure USB is supported at boot time.
  4. Check to see if there is a firmware update for your machine.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Client · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。