大网数据广告活动
启动与系统组件

Perpetual Boot failure with a prompt

· 52CE 我爱测

This article provides resolutions for the problem where a prompt at boot time stating that Windows did not boot properly.

This article helps you resolve the problem where a prompt at boot time stating that Windows did not boot properly.

Original product version:   Windows Embedded POSReady 7, Windows Embedded Standard 7, Windows Embedded Standard 7 Service Pack 1
Original KB number:   2689822

Symptoms

OEMs and their customers encounter a prompt at boot time stating that Windows did not boot properly requesting whether to 'boot Windows normally'.

Cause

Embedded systems are frequently shut down unceremoniously and may be shut down with Enhanced Write Filter (EWF) enabled. Either scenario will not allow Windows to shut down normally.

Resolution

For systems where either cause can occur frequently, the bcdedit utility build into the operating system can be used to prevent the prompt. Follow this procedure:

  1. Power up the machine and log in as local Administrator.

  2. Disable EWF, reboot, and log in again.

  3. Run this command from a command prompt with administrator privileges:

    bcdedit /set {current} bootstatuspolicy ignoreallfailures
    
  4. Reboot the machine, and log in again.

  5. Enable EWF, reboot, log in again.

  6. Shut down the machine normally (do not power off).

  7. Power up the machine and log in.

  8. If you now power of the machine and reboot the message should not occur.

More information

To disable or enable EWF on a drive, within a command prompt, which has administrator privileges you would use a command like:

ewfmgr c: -disable

or

ewfmgr c: -enable

Additional commands, see EWF Manager Commands.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
See source applicability · Source date 09/01/2020
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。