大网数据广告活动
域与目录服务

Active Directory communication fails

· 52CE 我爱测

Describes an issue in which Active Directory communication, including replication fails intermittently.

This article describes an issue in which Active Directory communication, including replication fails intermittently.

Applies to:   Windows 2000
Original KB number:   272294

Symptoms

In a Windows 2000 domain that has multihomed domain controllers, Active Directory communication, including replication, may fail intermittently.

Cause

This issue can occur if one of the network adapters is attached to an external network (such as the Internet) on the multihomed domain controller, and if Lightweight Directory Access Protocol (LDAP) and Kerberos traffic between the internal and external networks is partially or completely restricted because of a Proxy, ISA Server, NAT Server, or another firewall device.

In this scenario, network adapters on the multihomed domain controllers are registering both the inside and outside Internet Protocol (IP) addresses with the DNS server. DNS name resolution lookup requests return records in a "round robin" fashion, alternating the internal and external IP addresses. Replication operations require multiple lookup requests of SRV records. In this case, half of the DNS lookup requests return an IP address that can't be contacted, and the replication operation fails.

Resolution

To resolve this issue:

  1. Disable registration on the outside network adapter on the multihomed domain controller. To do so:

    1. Click Start, click Settings, and then click Network and Dial-Up Connections.
    2. Right-click the outside local area network (LAN) connection, and then click Properties.
    3. Click TCP/IP, and then click Properties.
    4. Click Advanced, and then click to clear the Register DNS for this connection check box.
  2. Disable the round robin functionality on the DNS server. To do so:

    1. Click Start, click Settings, click Administrative Tools, and then click DNS.
    2. Open the properties for the DNS server's name.
    3. Click the Advanced tab, and then click to clear the Enable round robin check box.
  3. Remove the existing entries in DNS. To do so:

    1. Browse to the following location: Under DNS\DNS Servername \Forward Lookup Zones\Domain Name
    2. Remove Host (A) record entries that refer to the domain controller's computer name for the outside network adapter IP addresses.
    3. Remove Host (A) record entries for the same name as the parent folder for the network adapter IP addresses.
  4. Start the DNS Management Console, right-click the server name, and then click Properties.

  5. Click the Interfaces tab, and then remove the external IP address so that DNS does not listen on it.

  6. Open a command prompt, type ipconfig /flushdns, press ENTER, type ipconfig /registerdns, and then press ENTER.

  7. Change the binding order of your network adapters so that the Internal adapter is the first bound adapter. To do this, follow these steps:

    1. Click Start, click Settings, and then click Network and Dial-Up Connections.
    2. On the Advanced menu, click Advanced.
    3. Verify that the internal network adapter is listed first in the Connections box.

Status

This behavior is by design.

More information

For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:

246804 How to enable or disable DNS updates in Windows 2000 and in Windows Server 2003

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。