大网数据广告活动
域与目录服务

You cannot start the Active Directory Users and Computers tool because the server is not operational

· 52CE 我爱测

Provides a solution to an issue where you cannot start the Active Directory Users and Computers tool because the server is not operational.

This article provides a solution to an issue where you cannot start the Active Directory Users and Computers tool because the server is not operational.

Original KB number:   323542

Symptoms

Any of the following symptoms may occur:

  • When you try to start the Active Directory Users and Computers tool, you receive the following error message:

    Naming Information cannot be located because:
    The Server is not operational.
    Contact your system administrator to verify that your domain is properly configured and is currently online.

  • When you try to start the Active Directory Sites and Services tool, you receive the following error message:

    Naming Information cannot be located because:
    The server is not operational.
    Contact your system administrator to verify that your domain is properly configured and is currently online.

  • When you try to start the Active Directory Domains and Trusts tool, you receive the following error message:

    The configuration information describing this enterprise is not available.
    The server is not operational.

  • Logon processing is very slow.

  • If you have multiple domain controllers, you can connect with the Active Directory Users and Computers tool to another domain controller that has port 389 open without receiving an error message. But you cannot access a domain controller until port 389 is opened.

Cause

These issues may occur if TCP/IP filtering is configured to permit only port 80 for TCP/IP traffic.

Resolution

Port 389 is used for Lightweight Directory Access Protocol (LDAP) connections. This port is blocked if TCP/IP filtering is configured incorrectly. By default, TCP/IP filtering is configured with the Permit All setting. To verify and correct this setting:

  1. Right-click My Network Places on the domain controller on which you cannot start Active Directory Users and Computers, and then click Properties.
  2. Click Internet Protocol, and then click Properties.
  3. Click Advanced.
  4. Click Options.
  5. Click TCP/IP Filtering, and then click Properties.
  6. For the TCP/IP Port setting, click Permit All.
  7. Restart the computer. This opens all TCP ports, including port 389.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。